Ford Suspension

This aluminum driveshaft spacer allows for the continued use of a stock-length driveshaft on lifted vehicles. Engineered to maintain proper tail shaft engagement and reduce the risk of slip yoke and u-joint failure, this innovate spacer spares you the cost and time required to...

Does your leaf sprung Ford need a little extra boost? This 1" front shackle kit is designed to provide additional ride height without affecting ride quality or handling.

Upgrade your truck's factory upper control arms with these high strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are built from high strength steel, boxed, gusseted and fully...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Make a statement with this 4"Lift Kit that will let you clear those 35" tires. This kit has everything you need to give you the ride you want and the look that's going to get a lot of attention.

Mounting hardware included

Fine tune the caster on the 97-03 Ford F-150 and 97-02 Expedition with these alignment cam bolts. Any amount of ride height change will cause the camber of your tires to change and affect premature wear to your tires if not corrected.

This multi-spring leaf pack provides 4" of lift on a Super Duty and 6" of lift on an Excursion without sacrificing ride quality. Meets or exceeds original equipment ratings and comes with factory-equipment-style rubber bushings. Sold individually.

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Take your Badlands edition Bronco higher with the 3.5" Adventure Series lift kit from Zone Offroad. Designed to maintain ride quality, handling and performance with room for larger tires, Kits build off the factory suspension geometry and add 2-piece strut spacers, Adventure Pro series...

Zone Offroad 1999-2004 Ford Super Duty 4wd 6" Suspension System. The newest offering for the leaf-sprung Super Duties is built around massive 9-leaf full height front leaf springs. The leaf springs thin, multi-leaf design provides a great ride while maintaining heavy-duty nature of the...

Zone Offroad now offers 5" radius arm lift kits for the 2023-2026 Ford F250/F350 Super Duty 4WD diesel trucks. These new 5" lift kits are designed to be complete with everything needed to properly lift your new Super Duty to allow clearance for up...

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

Is your truck lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8" solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Get the lift your truck deserves with this 3" Lift Kit from Zone Offroad. This kit has been designed specifically for your new Ford F-150 Lightning and provides clearance for up to 295/70R18 tires. The lift is provided by a 2-piece, combination top-mount and...

You've got the truck you want, now get the level look you want. This easy-to-install bolt-in lower coil spacers provide the leveled stance along with clearance for larger tires.

Are you ready to take a big step? With ample additional ground clearance and room for up to 35" tires, you're going to really stand out with this 6" Lift Kit. Fits 4WD 2000 - 2005 Ford Excursion. Go big, really big.

These high quality 5" cast iron lift blocks are specially designed to lift the rear of leaf spring trucks. They come finished in a black e-coating and use a tapered design to help improve pinion angle once installed. Uses 5/8" pin size. Sold in...

These high quality 2" cast iron lift blocks are specially designed to lift the rear of leaf spring trucks. They come finished in a black e-coating and use a tapered design to help improve pinion angle once installed. Uses 5/8" pin size. Sold in...

Improve the styling of your Ford Ranger while maintain the ride quality and handling characteristics with this 3" body lift from Zone Offroad. This kit raises the cab, bed and bumpers up off the frame to allow clearance for larger tires. It includes indestructible...