2007-2018 Jeep Wrangler | JK

While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality...

Upgrade your factory front track bar for improved strength, control, and axle positioning with this heavy duty adjustable replacement track bar. Designed for easy installation and fine adjustment, this track bar allows you to recent the front axle with a wide range of lift...

***See Pre-Installation Check in the Instructions to verify fitment*** Is your Jeep in need of a little front-end boost to compensate for heavy winch bumpers and/or clear a larger tire? These 3/4" coil spring spacers are specially designed for use on the front of...

When lifting your Jeep JK between 3-4" the front caster needs to be corrected to maintain handling and steering characteristics. These lower cam locks from Zone Offroad are an affordable option to correct caster alignment rather than swapping to aftermarket lower control arms. Fix...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

This replacement bushing kit is designed for the J5411 adjustable track bar kit. These polyurethane bushings are fluted for even distribution and include the sleeves to freshen up your Jeep JK's track bar when and if the time ever comes. Kit includes 4 bushing...

At full articulation off-road your Jeep has the potential to unseat which could lead to being stranded on the trail. This issue is even more apparent with certain aftermarket lift kits that use longer shocks and adjustable control arms designed for increased articulation. The...

While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality...

Get the look and the performance you want for your Jeep. This 3" Lift Kit for your 2WD 2007 - 2011 Jeep Wrangler (JK) will clear 35" tires and includes heavy-duty coil spacers that offer a dramatic improvement in both ground clearance and wheel...

Hit the dirt with this 2" body lift kit that allows you to fit tires up to 32". Each kit includes high-grade body bolts and Zone Offroad's Crush-Proof body blocks to fit your 2007 - 2018 Jeep Wrangler (JK) Gas model. It's easy to...

Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8” solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Is your Jeep lifted? Upgrade your factory rear sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8” solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Take performance to the next level with a set of these sway bar disconnects. Designed to allow you to quickly and easily disconnect the front sway bar to allow for increased front suspension travel and articulation. High strength construction and an adjustable design allows...

Stacked a spacer on top of your 3" kit and now your axle is pulled off to one side? Added a new bumper / winch and now your axle is off the other way? A track bar relocation system allows for relocation of track...

Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8” solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Jeep Wrangler JK's sit about 1.5" low in the front from the factory; add more weight from bumpers, winches, and tire carriers and you may find you could use a little extra boost in the front or rear. These front coil spring spacers are...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

JKS adjustable front track bar for RHD Jeep Wrangler JK provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, 3/8"- wall 1.5" diameter DOM CNC-bent tubing and powder...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...