https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J12N_J13N_J35N_J36N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J12_J13F_J35F_J36F.jpg

3 Inch Lift Kit | Jeep Wrangler JK (07-11) 2-Door

SKU: ZONJ12F

×
$747.75
Subtotal: $747.75

I have read the Important Notes and Verified my Vehicle Fitment

https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J12_J13F_J35F_J36F.jpg

3 Inch Lift Kit | Jeep Wrangler JK (07-11) 2-Door

$747.75

3 Inch Lift Kit | Jeep Wrangler JK (07-11) 2-Door

$747.75
Shock Option: FOX Adventure Series
Get the look and the performance you want for your Jeep. This 3" Lift Kit for your 2WD 2007 - 2011 Jeep Wrangler (JK) will clear 35" tires and includes heavy-duty coil spacers that offer a dramatic improvement in both ground clearance and wheel travel.

Features & Benefits

  • Brake line relocation brackets increase wheel travel and allow use of factory brake lines.
  • Bump stop extensions properly limit up-travel, protecting your vehicle.
  • Full length replacement coil springs add additional ride height while maintaining ride quality.
  • Heavy-duty, extended-length sway bar links improve operating angle for reduced body roll.
  • Rear track bar bracket correctly positions rear axle under vehicle.

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 16 x 8 and 4.5 in. Backspace
  • 35 x 12.5 with 17 x 9 and 4.5 in. Backspace
  • 35 x 12.5 with 18 x 9 and 4.5 in. Backspace

Shock Option

Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • Self-lubricating seals
  • Black powder coat finish

FOX 2.0 Adventure Series

  • 2-inch diameter steel body
  • Internal floating piston (IFP) monotube design
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish
  1. Will work on Rubicon models.
  2. 2012-18 models using the stock front driveshaft require exhaust extension kit J5305 listed in the accessories.
  3. Stock Control Arms? Alignment cam locks will add 2 degrees of caster when used on stock length control arms, which will better align your wheels.


Wheels / Tires:

  • Factory wheels cannot be reinstalled with lift kit due to rear sway bar interference. Follow recommended wheel/tire specifications for proper clearance.