Jeep Cherokee XJ | SJ

While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality...

Let the adventures begin with this 3" Lift Kit for your 4WD 1984 - 2001 Jeep Cherokee (XJ). This kit includes heavy-duty front coil springs and back leaf springs designed to give you the optimal amount of wheel travel so you're ready to go...

Does your XJ have a little drive line vibration? This 1" transfer case drop kit might just be the answer. This system comes with new fasters and lowers the transfer case to reduce driveline angles.

This replacement bushing kit is designed for Jeep XJ's equipped with Zone Offroad rear leaf springs. These durometer specific polyurethane bushings help isolate road noise and help improve suspension performance. Kit includes bushings and sleeves to complete (2) leaf springs.

Leave the pavement and explore more in your Jeep with this 4.5" Lift Kit with rear leaf springs. Fit 32" tires and get the ground clearance and wheel travel you want in your 4WD 1984 - 2001 Jeep Cherokee (XJ). Yet another kit from...

Tired of your rear lower shock mounts scraping across rocks when you're out wheeling? These high-clearance mounts raise the lower shock mount a full 3" so that they are even with the bottom of the axle tube, drastically increasing ground clearance. This weld-on bracket...

Take performance to the next level with a set of these sway bar disconnects. Designed to allow you to quickly and easily disconnect the front sway bar to allow for increased front suspension travel and articulation. High strength construction and an adjustable design allows...

This spring is a 5-leaf pack with anti-friction pads and center leaf spacer plates between each leaf to significantly decrease leaf pack internal friction. This rear XJ leaf spring provides 3" of lift and allows for the max amount of compression travel, which translates...

Control arm bushing kit designed specifically for Zone Offroad Jeep TJ, XJ, or ZJ lower control arms. This kit will fit the front and rear arms of the TJ or ZJ kits and the front arms on the XJ and MJ kits. One kit...

You've got the Jeep you want, now get performance you want. This easy-to-install 3" Combo Lift Kit comes with front coil springs, 4 shocks and 2 long Add-A-Leaf's for a smooth ride in your 4WD 1984 - 2001 Jeep Cherokee (XJ) model.

At full articulation off-road your Jeep has the potential to unseat which could lead to being stranded on the trail. This issue is even more apparent with certain aftermarket lift kits that use longer shocks and adjustable control arms designed for increased articulation. The...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate...

Leave the pavement and explore more in your Jeep with this 4.5" Lift Kit. Fit 32" tires and get the ground clearance and wheel travel you want in your 4WD 1984 - 2001 Jeep Cherokee (XJ). Yet another kit from enthusiasts, for enthusiasts.

Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8" solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Replace those old, weak, factory shackles and get a little lift at the same time. This slightly-longer-than-stock shackle will help your springs really flex to their full potential travel, while the shackle's beefy construction will reduce side to side movement.

Designed for the Jeep Cherokee XJ and Wrangler TJ, but compatible with so many other applications, this bar pin eliminator kit is a great option to convert over from a bar pin style mounting point to the more convenient eyelet bushing for more shock...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent...

Enhance your Wrangler TJ, LJ, or Cherokee XJ Jeep with JKS J-Flex adjustable front upper Control Arms. CNC-bent from DOM tubing for proper tire, frame and axle mount clearance, these front upper control arms feature forged flex ends that are adjustable. The design increases...