Jeep Wrangler

Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate...

Lift your Jeep and raise your performance expectations with this 3" Lift Kit. Increase your droop, wheel travel and get enough lift to fit 35" tires. Heavy-duty coil springs handle all the abuse you can throw at them. Fits 2012-2018 4WD 4 door Jeep...

Lift your Jeep and raise your performance with this 3" Lift Kit. Increase your droop, wheel travel and get enough lift to fit 33" tires. Heavy-duty coil springs handle all the abuse you can throw at them and still hold their original height. Fits...

These exhaust extensions improve clearance between the exhaust crossover pipe and the front driveshaft as required on both 2DR and 4DR 2012-2017 Jeep Wrangler JK models when a lift adding more than 2" of suspension droop travel is added.

Want a larger spare tire on your Jeep, but it won't fit on the stock bracket? This relocation bracket moves the mounting surface out 2 1/4" and up 1.5", allowing you to install up to a 35" tire.

At full articulation off-road your Jeep has the potential to unseat which could lead to being stranded on the trail. This issue is even more apparent with certain aftermarket lift kits that use longer shocks and adjustable control arms designed for increased articulation. The...

Lift your Jeep and raise your performance with this 3" Lift Kit. Increase your droop, wheel travel and get enough lift to fit 33" tires. Heavy-duty coil springs handle all the abuse you can throw at them and still hold their original height. Fits...

Designed as a complete system, this 3" lift includes everything necessary to properly lift your new Wrangler JL while allowing clearance for 35-37" tires. The extra ride height comes from a set of replacement JL-specific coil springs at each corner. These springs are engineered...

***See Pre-Installation Check in the Instructions to verify fitment***Take your Wrangler JL to new heights with this 2" lift kit from Zone Offroad. This 2" lift kit retains the original ride quality and uses JL-specific polyurethane coil spacers that mount on top of the...

Get the clearance you're looking for with this easy and economical 1.25" Body Lift Kit on your 1997 - 2006 Jeep Wrangler (TJ) . This lift won't affect your center of gravity, spring rate or steering geometry, so you can fit the bigger tires...

This replacement bushing kit is designed for the J5411 adjustable track bar kit. These polyurethane bushings are fluted for even distribution and include the sleeves to freshen up your Jeep JK's track bar when and if the time ever comes. Kit includes 4 bushing...

Improve the steering feel of your Jeep Wrangler JL or Gladiator JT with a FOX 2.0 ATS adjustable Steering Stabilizer shock. It's one of the best upgrades you can make. FOX's Adjustable Through Shaft design (ATS) cancels out unwanted steering forces in both directions,...

Hit the dirt with this 2" body lift kit that allows you to fit tires up to 32". Each kit includes high-grade body bolts and Zone Offroad's Crush-Proof body blocks to fit your 2007 - 2018 Jeep Wrangler (JK) Gas model. It's easy to...

Upgrade your Jeep TJ or LJ Wrangler's performance and reliability with JKS J-Flex adjustable rear lower control arms. CNC-bent from stout DOM tubing, the fully adjustable design allows you to fine-tune suspension geometry. The ends are also fully rebuildable and greaseable. With heavy duty...

Ready for an aggressive look that's ready to tackle the off road? This 4.25 combo lift kit is what you're looking for. This complete system greatly increases droop and wheel travel. You'll easily clear 33" tires with room to twist. Fits 1997 - 2006...

If you're going to lift a Jeep you want to keep performance in mind. This 1.75" Lift Kit for your 1997 - 2006 Jeep Wrangler (TJ) includes heavy-duty coil spacers and the bump stops you need to handle impacts and keep your springs from...

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

Replace those old, weak, factory shackles and get a little lift at the same time. This slightly-longer-than-stock shackle will help your springs really flex to their full potential travel, while the shackle's beefy construction will reduce side to side movement. These shackles provide 1"...

Designed for the Jeep Cherokee XJ and Wrangler TJ, but compatible with so many other applications, this bar pin eliminator kit is a great option to convert over from a bar pin style mounting point to the more convenient eyelet bushing for more shock...

Does your 87-95 Jeep YJ have a little drive line vibration after installing a lift? This 1-5/8" transfer case drop kit might just be the answer. Typically used with 3.5-4.5" lifts when the stock slip yoke rear driveshaft is retained. This system comes with...