https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J30N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J30.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J30F.jpg

2 Inch Lift Kit | Jeep Wrangler JL (18-24)

SKU: ZONJ30

×
$197.95
Subtotal: $197.95

I have read the Important Notes and Verified my Vehicle Fitment

https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J30.jpg

2 Inch Lift Kit | Jeep Wrangler JL (18-24)

$197.95

2 Inch Lift Kit | Jeep Wrangler JL (18-24)

$197.95
Shock Option: No Shock

***See Pre-Installation Check in the Instructions to verify fitment***

Take your Wrangler JL to new heights with this 2" lift kit from Zone Offroad. This 2" lift kit retains the original ride quality and uses JL-specific polyurethane coil spacers that mount on top of the factory coil springs to provide additional lift while allowing clearance for up to 35" tires. Also included are front and rear bump stop extensions to properly limit up travel and extended length sway bar links to correct sway bar operating angle.

Features & Benefits

  • Front and rear urethane coil spacers to lift and retain factory handling.
  • Front and rear bump stop extension to properly engage bump stops during hard compression.
  • Extended length front sway bar links to correct sway bar operating angle

Recommended Tires & Wheels

(Trimming may be required)

  • 33 x 12.5 with 17 x 9 and Stock in. Backspace
  • 35 x 12.5 with 17 x 9 and 5 in. Backspace
  • 35 x 12.5 with 18 x 9 and 5.5 in. Backspace

Shock Option

Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • Self-lubricating seals
  • Black powder coat finish

FOX 2.0 Adventure Series

  • 2-inch diameter steel body
  • Internal floating piston (IFP) monotube design
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish
  1. Will work on both Gas and Diesel models.
  2. See Pre-Installation Check in the Instructions to verify fitment