BDS
Selecting a BDS lift gives you peace of mind knowing that our parts fit and perform as close to the original equipment as possible.
JKS
Since 1989, JKS Manufacturing has developed some of the world’s most widely used and respected products for Jeep® vehicles.
RT Pro
Made in the USA: Michigan-designed, tested & manufactured. Made to last: race tested. Made for riders: engineered & built by those who ride.
Popular Searches
6” Knuckle & Strut Lift Kit
09-10 Ford F150 2wd 6in Kit
From $1,330.59
It’s time to hang with the big boys. You can’t help but stand out with this 6" Lift Kit that clears massive 37" tires. Get the look and performance you want out of your RWD 2009 - 2013 Ford F-150. Yet another kit from enthusiasts, for enthusiasts.
Quick Specs
37 x 12.5
Max Tire Size
6"
Front Lift Height
5"
Rear Lift Height
8 hrs
Installation Time
Overview
| Front Lift Height | 6" |
| Rear Lift Height | 5" |
| Front Lift Method | Knuckle & Strut Spacer |
| Rear Lift Method | Cast Blocks |
| Lift Type | Lift Kit |
| Wheel Size | 18 x 9 |
| Back Spacing | 5" |
| Max Tire Size | 37 x 12.5 |
| Wheel Size 2 | 18 x 9 |
| Back Spacing 2 | 5" |
| Max Tire Size 2 | 37 x 12.5 |
| Wheel Size 3 | 20 x 9 |
| Back Spacing 3 | 5.5" |
| Max Tire Size 3 | 37 x 12.5 |
| Is Adjustable | No |
| Finish | Powdercoat |
| Metal Cutting Required | No |
| Accommodates Factory Wheels | No |
| Welding Required | No |
Features
- High-strength, 1/4" steel construction crossmembers correct lower control arm geometry.
- High-pressure, extended length, replacement front struts improve performance on and offroad.
- High-strength, CNC machined, replacement Steering_Knuckles improve strength while correcting steering angles.
- Lift system does not change the front track width of the vehicle.
All In The Details
- Driveline Notice: Although rare, some models with 1-piece rear driveshaft may require rear driveshaft spacer kit to ensure sufficient spline engagement.
- Fitment: Will not fit Raptor models.
- Lift Block Selection: This kit is offered with either 4" or 5" rear lift block kit and in either case it will replace the factory rear blocks. The 5" block will net a level to slightly tail high stance, the 4" block will net a level to slightly tail low stance. Choose rear lift height based on your ride height preference.
- Power steps? If your vehicle is equipped with factory power steps, it will require E-Brake Relocation Bracket. Add in configuration / checkout.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
- Wheels / Tires: Aftermarket 18" or larger wheels required with this kit. Follow recommended wheel/tire specifications to ensure proper fitment and minimize the need for trimming.
Specifications
| Install Time Hours | 8 hrs |
| Difficulty Level |
3 out of 5
Automotive mechanical experience recommended, some specialty tools required, adjustment may be necessary, minor cutting. |
- 2009 Ford F-150 RWD
- 2010 Ford F-150 RWD
- 2011 Ford F-150 RWD
- 2012 Ford F-150 RWD
- 2013 Ford F-150 RWD
From $1,330.59+ taxes
VIEW SUMMARY
HIDE SUMMARY