Jeep Wrangler

Upgrade your Jeep Wrangler JK's performance and reliability with JKS J-Flex adjustable front lower control arms. CNC-bent from stout DOM tubing, the fully adjustable design allows you to fine-tune suspension geometry. The ends are also fully rebuildable and greaseable. With heavy duty 1-1/4"-12 threads...

Performance Series 2.0 IFP steering stabilizers take the load off your Wrangler JL or Gladiator JT's steering components -- PN 985-24-173. Keep your tires tracking straight and true--especially if you are running oversized off-road tires which have a tendency to seek out traction in...

Improve steering response on your Jeep Wrangler JL or Gladiator JT with a FOX 2.0 ATS steering stabilizer shock. FOX Performance Series stabilizers drastically decrease bump steer after installing large tires on your Jeep. The unique ATS design utilizes a Through Shaft (TS) architecture...

Lift your Jeep and raise your performance expectations with this 3" Lift Kit. Increase your droop, wheel travel and get enough lift to fit 35" tires. Heavy-duty coil springs handle all the abuse you can throw at them. Fits 2012-2018 4WD 2 door Jeep...

Want the perfect combination of off road performance and on road handling? This 4" Suspension Lift lets you clear 35" tires and have the ground clearance and wheel travel you want when you venture off road. Fits 4 door 4WD 2007 - 2011 Jeep...

Get the look and the performance you want for your Jeep. This 3" Lift Kit for your 2WD 2007 - 2011 Jeep Wrangler (JK) will clear 35" tires and includes heavy-duty coil spacers that offer a dramatic improvement in both ground clearance and wheel...

Take performance to the next level with a set of these sway bar disconnects. Designed to allow you to quickly and easily disconnect the front sway bar to allow for increased front suspension travel and articulation. High strength construction and an adjustable design allows...

Is your Jeep lifted? Upgrade your factory rear sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8” solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Stacked a spacer on top of your 3" kit and now your axle is pulled off to one side? Added a new bumper / winch and now your axle is off the other way? A track bar relocation system allows for relocation of track...

If you purchased or built a long arm kit for a TJ or XJ and it didn't come with new sway bar mounts for the axle, then this is the item for you. This new weld on axle sway bar mount moves the stock...

Does your 87-95 Jeep YJ have a little drive line vibration after installing a lift? This 1-5/8" transfer case drop kit might just be the answer. Typically used with 3.5-4.5" lifts when the stock slip yoke rear driveshaft is retained. This system comes with...

If you've added more weight to your JK with bumpers, winches, a tire carrier, etc. you may find you could use a little extra boost in the front or rear. These rear coil spring spacers are designed to give you that extra boost on...

Lift your Jeep quickly and easily with this 2" lift kit from Zone Offroad. This kit uses front and rear polyurethane coil spacers to raise the ride height and retain factory ride quality. In addition a set of front and rear bump stop extensions...

Ready for an aggressive look that's ready to tackle the off road? This 4.25 combo lift kit is what you're looking for. This complete system greatly increases droop and wheel travel. You'll easily clear 33" tires with room to twist. Fits 1997 - 2006...

If you're going to lift a Jeep you want to keep performance in mind. This 1.75" Lift Kit for your 1997 - 2006 Jeep Wrangler (TJ) includes heavy-duty coil spacers and the bump stops you need to handle impacts and keep your springs from...

Have a Jeep Wrangler JL in need of a little extra boost to clear larger tires without affecting ride quality and handling? This 1.25" body lift is designed to lift the body off the chassis for additional tire clearance while maintaining factory ride quality,...

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8" solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Is your Jeep lifted? Upgrade your factory rear sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8” solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Take performance to the next level with a set of these sway bar disconnects. Designed to allow you to quickly and easily disconnect the front sway bar to allow for increased front suspension travel and articulation. High strength construction and an adjustable design allows...