1997-2003 Ford F-150

Improve the styling of your Ford F150 while maintain the ride quality and handling characteristics with this 2" body lift from Zone Offroad. This kit raises the body and bumpers up off the frame to allow clearance for larger tires while maintaining factory body...

Deck out the truck you've put so much work into. This 2" torsion key leveling kit is a snap to install on your 1997 - 2003 Ford F-150 - 4WD Truck. It's super easy to install—and, like every Zone kit, is manufactured and inspected...

When you want to go beyond the level and do a full lift, this is your kit. Fit tires up to 33" with this 2" front and rear lift kit. Includes torsion keys for the front and block and u bolts for the back....

These high quality 2" cast iron lift blocks are specially designed to lift the rear of leaf spring trucks. They come finished in a black e-coating and use a tapered design to help improve pinion angle once installed. Uses 5/8" pin size. Sold in...

Improve the styling of your Ford F150 while maintain the ride quality and handling characteristics with this 3" body lift from Zone Offroad. This kit raises the cab, bed and bumpers up off the frame to allow clearance for larger tires. It includes indestructible...

These high quality 3" cast iron lift blocks are specially designed to lift the rear of leaf spring trucks. They come finished in a black e-coating and use a tapered design to help improve pinion angle once installed. Uses 5/8" pin size. Sold in...

Combo kits offer the best bang for the buck by combining a lift kit with a small body lift to offer clearance for larger tires while maintaining factory ride quality and handling characteristics. This 4" combo lift kit for the F150 combines a 2"...

These high quality 4" cast iron lift blocks are specially designed to lift the rear of leaf spring trucks. They come finished in a black e-coating and use a tapered design to help improve pinion angle once installed. Uses 5/8" pin size. Sold in...

These high quality 5" cast iron lift blocks are specially designed to lift the rear of leaf spring trucks. They come finished in a black e-coating and use a tapered design to help improve pinion angle once installed. Uses 5/8" pin size. Sold in...

It's time to hang with the big boys. You can't help but stand out with this 6" Lift Kit that clears 35" tires. Get the look and performance you want out of your 4WD 1997-2003 Ford F150. Yet another kit from enthusiasts, for enthusiasts.

Need a little extra boost in the rear of your truck? This add-a-leaf kit will provide additional lift in the rear while maintaining ride quality and increasing load capacity.

Fine tune the caster on the 97-03 Ford F-150 and 97-02 Expedition with these alignment cam bolts. Any amount of ride height change will cause the camber of your tires to change and affect premature wear to your tires if not corrected.

This aluminum driveshaft spacer allows for the continued use of a stock-length driveshaft on lifted vehicles. Engineered to maintain proper tail shaft engagement and reduce the risk of slip yoke and u-joint failure, this innovate spacer spares you the cost and time required to...

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...