https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D57N_D67N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D57F_D67F.jpg

6.5 Inch Lift Kit W/ Radius Arm | Ram 3500 (13-18) 4WD | Diesel

SKU: ZOND57F

×
$1,282.55
Subtotal: $1,282.55

I have read the Important Notes and Verified my Vehicle Fitment

https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D57F_D67F.jpg

6.5 Inch Lift Kit W/ Radius Arm | Ram 3500 (13-18) 4WD | Diesel

$1,282.55

6.5 Inch Lift Kit W/ Radius Arm | Ram 3500 (13-18) 4WD | Diesel

$1,282.55
Shock Option: FOX Adventure Series
Take your RAM 3500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arms to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.

Features & Benefits

  • Progressive rate front coil springs improve ride quality and -performance.
  • HD radius arm to correct caster while maximizing ground clearance.
  • Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle.
  • Extended bump stops, sway bar relocation and brake line relocation to maintain factory-like operating angles.
  • Replacement rear lift blocks and u-bolts to lift and level the stance

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 17 x 9 and 4.5 in. Backspace
  • 37 x 12.5 with 18 x 9 and 5.75 in. Backspace
  • 37 x 12.5 with 20 x 9 and 5.75 in. Backspace

Shock Option

Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • Self-lubricating seals
  • Black powder coat finish

FOX 2.0 Adventure Series

  • 2-inch diameter steel body
  • Internal floating piston (IFP) monotube design
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting silver coated finish
  1. Front drive-line vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit.
  2. Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
  3. Does NOT work for models with factory rear airbag suspension.
  4. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.