Shop By Vehicle
Shop by vehicle
×
What fits my ride?
Shop By Vehicle
Shop By Vehicle
×
What fits my ride?
5 Inch Lift Kit | Toyota Tundra (07-15)
SKU:
ZONT1F
×
- $1,476.70
- Unit price
- per
The Tundra has some serious power, take advantage of it with this 5" Lift Kit that makes your truck an off road machine. Iron knuckles and heavy-duty, boxed crossmembers integrate with differential mounts to lock everything together. Fits 2007 - 2015 Toyota Tundra.
Features & Benefits
- High strength crossmembers to correct lower control arm positioning.
- Ductile iron steering knuckles to corect steering geometry and maintain ESC system compatibility.
- Lower strut extensions to provide lift and install easily.
- Weld-in chassis plates add strength and rigidity.
- Rear lift blocks and u-bolts to lift and level the stance.
- Sway bar, brake line, and bump stop relocation brackets to correct operating angles
Recommended Tires & Wheels
(Trimming may be required)
- 35 x 12.5 with 18 x 9 and 5.5 in. Backspace
- 35 x 12.5 with 20 x 9 and 6.25 in. Backspace
- 35 x 12.5 with 22 x 9 and 6.25 in. Backspace
Rear Shock Option
Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- Self-lubricating seals
- Black powder coat finish
FOX 2.0 Adventure Series
- 2-inch diameter steel body
- Internal floating piston (IFP) monotube design
- Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
- Will NOT work on 2015 TRD Pro Models.
- Will work with Bilstein (yellow) factory front struts on 2014-2015 models.
- RWD models may require driveline modification.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
- Models equipped with 6 piston calipers will require clearance machining on the caliper near the bolt holes on the mounting surface.
Wheels
/ Tires:
- Factory 18" wheels cannot be reinstalled with this kit due to steering interference.
- Factory 20" wheels with a maximum 6.25" backspacing can be used.
- Follow recommended wheel/tire specifications to ensure proper fitment and minimize the need for trimming.
- Choosing a selection results in a full page refresh.