https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_F1N_F2N_F3N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_F1F_F2F_F3F.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_F1N_F2N_F3N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_F1F_F2F_F3F.jpg

4 Inch Lift Kit | Ford F250/F350 Super Duty (99-04) 4WD

Zone Offroad
SKU: ZONF1F

×
$1,023.65
Subtotal: $1,023.65

I have read the Important Notes and Verified my Vehicle Fitment

Save to Build List

Find a Local Installer
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_F1F_F2F_F3F.jpg

4 Inch Lift Kit | Ford F250/F350 Super Duty (99-04) 4WD

$1,023.65
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_F1N_F2N_F3N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_F1F_F2F_F3F.jpg

4 Inch Lift Kit | Ford F250/F350 Super Duty (99-04) 4WD

$1,023.65
Front U-Bolt Type: Radius
Shock Option: FOX Adventure Series
OVERVIEW  
Climb up and stand out from the crowd with this 4" Lift Kit that will have you clearing 35" tires. You'll definitely make a statement with this complete with leaf spring & block lift for your 4WD 1999 Ford F-250 / F-350.

Features & Benefits

  • New front leaf springs with bolt style leaf alignment clamps, anti-friction pads, OE style rubber bushings and tapered leaves for long term performance and great ride qualtiy 1-1/4".
  • Solid steel track bar with urethane mounts to properly center the axle
  • New front & Rear U-bolt with high nuts & washers Rear 3" Block kit
  • Performance custom valved Zone Shocks included

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 16 x 10 and 4 in. Backspace

Front U-Bolt Type

This vehicle was manufactured with either square front U-Bolts or radiused front U-bolts. Typically, 1999-2000 are square and 2001-2004 are radiused, but that is not always the case. The radiused U-bolts aren't square or round, but rather have a gentle radius that matches a cast factory upper U-bolt plate on top of the factory spring. Vehicles manufactured prior to 2-28-99 require yet another different box kit due to a change in the factory track bar. Please make the appropriate selection for your particular vehicle.

Shock Option

Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • Self-lubricating seals
  • Black powder coat finish

FOX 2.0 Adventure Series

  • 2-inch diameter steel body
  • Internal floating piston (IFP) monotube design
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish
IMPORTANT NOTES  
  1. Dually applications will require different rear 3-7/8" I.D. u-bolts.
  2. Will not fit vehicles manufactured before 3-1-1999 with 5/8" track bar bolt head size.
  3. Vehicles equipped with 2 piece rear driveshafts may require the carrier bearing to be lowered. If vehicle is equipped with rear top mounted overload springs 4 of u-bolt part number UBT4035 may be required. Selecting the Ubolt option below will add four (4) UBT4035s to the base kit.
  4. Trucks equiped with gas engine may achieve a slightly higher front stance. If truck is equipped with curved/radiussed style front ubolts order kit # F1. If truck is equipped with square style front ubolts order kit # F2
INSTALLATION  
SPECIFICATION  
    FITMENT  
    REVIEWS