https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D54N_D65N_D136N_D139N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D54F_D65F_D136F_D139F.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D54N_D65N_D136N_D139N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D54F_D65F_D136F_D139F.jpg

4.5 Inch Lift Kit W/ Radius Arm | Ram 3500 (13-18) 4WD | Diesel

Zone Offroad
SKU: ZOND136F

×
$1,320.50
Subtotal: $1,320.50

I have read the Important Notes and Verified my Vehicle Fitment

Save to Build List

Find a Local Installer
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D54F_D65F_D136F_D139F.jpg

4.5 Inch Lift Kit W/ Radius Arm | Ram 3500 (13-18) 4WD | Diesel

$1,320.50
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D54N_D65N_D136N_D139N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_D54F_D65F_D136F_D139F.jpg

4.5 Inch Lift Kit W/ Radius Arm | Ram 3500 (13-18) 4WD | Diesel

$1,320.50
Rear Lift Option: 2 Inch Block Kit
Shock Option: FOX Adventure Series
OVERVIEW  
Take your RAM 3500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arms to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.

Features & Benefits

  • Progressive rate front coil springs improve ride quality and off-road performance.
  • HD radius arm to correct caster while maximizing ground clearance.
  • Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle.
  • Bump stop relocation, sway bar relocation and brake line relocation to maintain factory-like operating angles.
  • Replacement rear lift blocks and u-bolts to lift and level the stance

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 17 x 9 and 4.5 in. Backspace
  • 37 x 12.5 with 18 x 9 and 5.75 in. Backspace
  • 37 x 12.5 with 20 x 9 and 5.75 in. Backspace

Rear Lift Option

3 Inch Block Kit

  • Level to tail high appearance

2 Inch Block Kit

  • Tail low to level stance

Shock Option

Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • Self-lubricating seals
  • Black powder coat finish

FOX 2.0 Adventure Series

  • 2-inch diameter steel body
  • Internal floating piston (IFP) monotube design
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting silver coated finish
IMPORTANT NOTES  
  1. Although very rare, front drive-line vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit.
  2. Optional t-case indexing ring kit recommended to reduce front driveline angle.
  3. Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813. Fitment:
  4. Does NOT work for models with factory rear airbag suspension.
  5. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
INSTALLATION  
SPECIFICATION  
    FITMENT  
    REVIEWS