https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J31N_J33N.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_fox_adv_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zone_shock_card_nitro_series.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J31F_J33F.jpg

3 Inch Lift Kit | Jeep Wrangler JL (18-24) 4-Door

SKU: ZONJ31F

×
$760.75
Subtotal: $760.75

I have read the Important Notes and Verified my Vehicle Fitment

https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/zon_J31F_J33F.jpg

3 Inch Lift Kit | Jeep Wrangler JL (18-24) 4-Door

$760.75

3 Inch Lift Kit | Jeep Wrangler JL (18-24) 4-Door

$760.75
Shock Option: FOX Adventure Series
Take your Wrangler JL to new heights with this 3" lift kit from Zone Offroad. This 3" lift kit includes everything needed from full length coil springs and bump stop extensions to longer sway bar links, rear track bar bracket and lower cam washers. Get the look, performance, and capability your Jeep deserves with clearance for up to 37" tires.

Features & Benefits

  • Front and rear replacement coil springs s to lift.
  • Front and rear bump stop extension to properly engage bump stops during hard compression.
  • Front and rear sway bar links to correct sway bar operating angle.
  • Front lower cam washers to correct caster.
  • Rear track bar bracket to recenter axle under vehicle

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 17 x 9 and 4.5 in. Backspace
  • 37 x 12.5 with 17 x 9 and 4.5 in. Backspace

Shock Option

Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • Self-lubricating seals
  • Black powder coat finish

FOX 2.0 Adventure Series

  • 2-inch diameter steel body
  • Internal floating piston (IFP) monotube design
  • Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish
  1. Does not fit Diesel Models.
  2. Non-Rubicon comes from factory at lower ride height, will net slightly more lift final stance the same for all models.
  3. Stock wheels cannot be reinstalled without spacers due to rear sway bar interference.
  4. Will not fit 4xe models.
  5. Will not fit Rubicon 392 models.