Shop By Vehicle
Shop by vehicle
×
What fits my ride?
Shop by vehicle
Shop By Vehicle
×
What fits my ride?
3 Inch Lift Kit | Jeep Gladiator JT (20-25)
SKU:
ZONJ34F
Select Vehicle
Enter Year, Make, Model to verify Fitment
- $872.75
- Unit price
- per
Zone Offroad expands its lineup for the Jeep Gladiator JT with new 3" lift kits designed to improve the appearance, performance, and overall capability. These 3" lift kits are a step up from the competition offering better on-road and off-road performance at a great price point for the best value on the market with room for 35-37" tires. As with all Zone Offroad lift kits, these kits are backed by Factory Protection Plus, the comprehensive extended warranty giving you peace of mind on or off the road with a 5-year/100,000-mile drivetrain warranty, ESC system compatibility and Zone Offroad's limited lifetime warranty.
Features & Benefits
- F/R full length coil springs provide lift and level the stance.
- Rear springs are dual rate to improve performance and load capacity.
- F/R extended length sway bar links improve strength and correct operating angle.
- F/R bump stop extensions to properly limit suspension uptravel.
- Front control arm cam locks to correct front end caster.
- Nitro series gas or FOX adventure series IFP gas shocks to improved ride and offroad performance
- Allows clearance for 35-37" tires
Recommended Tires & Wheels
(Trimming may be required)
- See Notes with See Notes and See Notes in. Backspace
Shock Option
Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- Self-lubricating seals
- Black powder coat finish
FOX 2.0 Adventure Series
- 2-inch diameter steel body
- Internal floating piston (IFP) monotube design
- Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
- Does NOT fit Diesel Models
- Does NOT fit Mojave Models
- If upgrading with the 3/4" Coil Spring Spacer (ZONJ2101) See Pre-Installation Check in spacer instructions to verify fitment.
Wheel and Tire Info:
Non-Rubicon Models:
- Tire size: 35x12.50
- Wheel size:17x9, 18x9, 20x9
- Backspacing: 4.5"
Rubicon Models:
- Tire size: 37x12.50
- Wheel size:17x9, 18x9, 20x9
- Backspacing: 4.5"
Installation Guides :
Est. Install Time :
4-5 hrsDifficulty Level :
Moderately EasyTools Needed :
Wrenches: Standard- Front Lift Method : Coil Spring
- Front Lift Height : 3
- Rear Lift Method : Coil Spring
- Rear Lift Height : 3"
- Shocks Included : Yes
| Year | Make | Model | Submodel | Drive Type | Fuel Type | Position | Lift Height |
|---|---|---|---|---|---|---|---|
| 2020 | Jeep | Gladiator | ALL | ALL | ALL | Front and Rear | 3" |
| 2021 | Jeep | Gladiator | ALL | ALL | GAS | Front and Rear | 3" |
| 2022 | Jeep | Gladiator | ALL | ALL | GAS | Front and Rear | 3" |
| 2023 | Jeep | Gladiator | ALL | ALL | GAS | Front and Rear | 3" |
| 2024 | Jeep | Gladiator | ALL | ALL | ALL | Front and Rear | 3" |
| 2025 | Jeep | Gladiator | High Tide | ALL | ALL | Front and Rear | 3" |
| 2025 | Jeep | Gladiator | NightHawk | ALL | ALL | Front and Rear | 3" |
| 2025 | Jeep | Gladiator | Rubicon | ALL | ALL | Front and Rear | 3" |
| 2025 | Jeep | Gladiator | Rubicon X | ALL | ALL | Front and Rear | 3" |
| 2025 | Jeep | Gladiator | Sport | ALL | ALL | Front and Rear | 3" |
| 2025 | Jeep | Gladiator | Sport S | ALL | ALL | Front and Rear | 3" |
| 2025 | Jeep | Gladiator | Texas Trail | ALL | ALL | Front and Rear | 3" |
| 2025 | Jeep | Gladiator | Willys | ALL | ALL | Front and Rear | 3" |
- Choosing a selection results in a full page refresh.