Shop By Vehicle
Shop by vehicle
×
What fits my ride?
Shop By Vehicle
Shop By Vehicle
×
What fits my ride?
2 Inch Lift Kit | Jeep Cherokee XJ (84-01)
SKU:
ZONJ4
×
- $114.95
- Unit price
- per
Take your Jeep XJ up a notch with this 2" lift kit from Zone Offroad. This kit includes everything needed from polyurethane coil spacers and bolt-in bump stop extensions to a rear add-a-leaf kit and u-bolts to level the stance. Get the look, performance, and capability your truck deserves with clearance for larger tires.
Features & Benefits
- Front 2" coil spring spacers raise lift height while retaining factory ride quality.
- Front bump stop extensions to properly limit suspension up travel.
- Rear long add-a-leafs, new center pins, clamps and replacement u-bolts are supplied to freshen up the rear while leveling the stance
Recommended Tires & Wheels
(Trimming may be required)
- 30 x 9.5 with 15 x 7 and 4 in. Backspace
Rear Axle Option
This truck was produced with different rear axles. Be sure to measure the diameter of your rear axle before ordering. The easiest way to accurately measure the diameter of your rear axle is to measure the inner diameter of your rear-axle U-bolts; to do so, use a tape to measure the distance between the inside edges of the threaded ends of your u-bolts.
- Chrysler 8.25 Rear Axle (3 Inch Diamater)
- Dana 35 Rear Axle (2.75 Inch Diameter)
Shock Option
Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- Self-lubricating seals
- Black powder coat finish
FOX 2.0 Adventure Series
- 2-inch diameter steel body
- Internal floating piston (IFP) monotube design
- Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
- Check Rear Axle Diameter: The XJ was manufactured with different rear axles. You'll need to identify yours to complete an order. To tell the difference, measure the inner diameter (I.D.) of your rear U-bolts. The Chrysler 8.25 rear axle uses a 3" I.D. U-bolt and the Dana 35 rear axle requires a 2-3/4" I.D. U-bolt.
- Choosing a selection results in a full page refresh.