https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_01.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_02.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_03.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_04_truck.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_01.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_02.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_03.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_04_truck.jpg

2 Inch Lift Kit | Ford Bronco (Badlands and all Sasquatch-equipped) (21-25)

Zone Offroad
SKU: ZONF1221

×
$159.99
Subtotal: $159.99

Save to Build List

Find a Local Installer
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_01.jpg

2 Inch Lift Kit | Ford Bronco (Badlands and all Sasquatch-equipped) (21-25)

$159.99
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_01.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_02.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_03.jpg
https://serenity-foxfactory.asset.akeneo.cloud/fox_asset_family/media/F1221_04_truck.jpg

2 Inch Lift Kit | Ford Bronco (Badlands and all Sasquatch-equipped) (21-25)

$159.99
OVERVIEW  
Building off the impressive design and capability of the new Ford Bronco with its on the 4-corner coilover design, the team at Zone Offroad are offering a 2" lift solution designed for the Badlands trim and Sasquatch-equipped Ford Broncos. These new 2" lift kits are lift and level the stance eliminating the factory nose-low rake and allowing clearance for up to 35" tires. This new kit is designed to take advantage of the impressive travel on the new Bronco utilizing top mounted strut spacers to raise the stance without sacrificing ride quality or overall driveability. The spacers are built from heavy duty semi-aromatic glass-fiber reinforced nylon resin design, offering strength and a clean OE appearance once installed. Additionally supplied for the front a set of spring perch spacers to level out the front stance as well as bump stops extensions which allow you to get the lift without overextending the suspension-steering/driveline operating angles allowing for extreme use. Rounding out the kit is replacement hardware along with step-by-step instructions allowing you to bolt-on this 2" lift kit within a few hours. Optional Adventure Pro Series Upper Control Arms are available for additional strength and performance. Give your Bronco a boost with Zone Offroad.

Features & Benefits

  • Lifts and levels stance without affecting ride quality or driveability
  • Allows clearance for larger 35" tire/wheel/tire packages
  • Top-mount design along with spring perch spacer and bump stop extension to provide lift, while maintaining ride quality
  • Designed to work within the operating limits of the factory UCA

Recommended Tires & Wheels

(Trimming may be required)

  • 35 x 12.5 with 17 x 9 and 5"-5.5" in. Backspace
  • 35 x 11.5 with 20 x 9 and 5"-6" in. Backspace
IMPORTANT NOTES  
INSTALLATION  
SPECIFICATION  
  • Front Lift Method : Strut Spacer
  • Front Lift Height : 2
  • Rear Lift Method : Strut Spacer
  • Rear Lift Height : 1"
  • Shocks Included : No
FITMENT  
2023|Ford|Bronco|Everglades|*|*|4|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2022|Ford|Bronco|Badlands|*|*|*|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2023|Ford|Bronco|Heritage Limited Edition|*|*|*|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2025|Ford|Bronco|Badlands|*|*|*|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2023|Ford|Bronco|Wildtrak|*|*|*|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2022|Ford|Bronco|Everglades|*|*|4|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2023|Ford|Bronco|Badlands|*|*|*|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2024|Ford|Bronco|Heritage Limited Edition|*|*|*|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2022|Ford|Bronco|Wildtrak|*|*|*|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2025|Ford|Bronco|Big Bend|*|*|4|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2024|Ford|Bronco|Black Diamond|*|*|*|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2023|Ford|Bronco|Heritage Edition|*|*|*|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2025|Ford|Bronco|Heritage Edition|*|*|4|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2024|Ford|Bronco|Wildtrak|*|*|*|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2025|Ford|Bronco|Stroppe Edition|*|*|2|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2021|Ford|Bronco|Wildtrak|4WD|*|*|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2024|Ford|Bronco|Everglades|*|*|4|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2024|Ford|Bronco|Heritage Edition|*|*|*|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2025|Ford|Bronco|Outer Banks|*|*|4|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2024|Ford|Bronco|Badlands|*|*|*|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2025|Ford|Bronco|Base|*|*|*|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2021|Ford|Bronco|Badlands|*|*|*|18833|Suspension Lift Kit|Each|1||||N/A|1|||||||||||;2024|Ford|Bronco|Big Bend|*|*|*|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||;2024|Ford|Bronco|Outer Banks|*|*|*|18833|Suspension Lift Kit|Each|1||||Front and Rear|168|||||||||||
REVIEWS  

Customer Reviews

Based on 4 reviews
0%
(0)
0%
(0)
50%
(2)
0%
(0)
50%
(2)
M
Marques N.
2" lift

Kit was easy to install with basic hand tools. The only issue I had to overcome was the bolt holes on the hockey style puck were undersized for the supplied bolts. I tried multiple sockets to fit inside the undersized opening but none worked, I had to force the socket on which had me worried of cracking the insert. Other that that I enjoy the stance of my level vehicle.

Thanks for your feedback! A thin walled 17mm socket works well for torqueing those nuts

C
Chris
Labor time

The labor time on this is very short compaired to what it should be. No way you are taking the front struts apart and all that in 2-3 hours. This should be listed as a 5-6 hour job.

R
Rsanches
Disappointed

I ordered the 2in kit for my bronco badlands. The rear hardware nuts was the wrong size!!! They did not match the diameter of the studs and bolts provided! So when I went to put the first nut on it stripped the top Mount stud and now I have to order a OEM stud! I had to go to ford and get OEM strut Mount nuts so I can finish the job. Very disappointed!

Hello, Sorry to hear you had trouble. Please reach out to our technical support department for as...

M
Marques N.
2" lift

Kit was easy to install with basic hand tools. The only issue I had to overcome was the bolt holes on the hockey style puck were undersized for the supplied bolts. I tried multiple sockets to fit inside the undersized opening but none worked, I had to force the socket on which had me worried of cracking the insert. Other that that I enjoy the stance of my level vehicle.

Thanks for your feedback! A thin walled 17mm socket works well for torqueing those nuts