Suspension Parts >

***See Pre-Installation Check in the Instructions to verify fitment*** Is your Jeep in need of a little front-end boost to compensate for heavy winch bumpers and/or clear a larger tire? These 3/4" coil spring spacers are specially designed for use on the front of...

Improve the handling of a lifted 2015-2020 Chevy Colorado or GMC Canyon equipped with a factory rear sway bar. The Zone front sway bar link kit will improve handling and prevent body roll.The Zone heavy-duty replacement sway bar links are designed specifically for lifted...

This front sway bar shackle link kit converts factory pivot-style sway bar axle mounts to a shackle-type link, preventing the sway bar axle mount from binding and allowing for maximum axle articulation.

Dial in the front alignment caster positioning with these alignment cam bolts. These can be used on Jeep TJ and ZJ models and install on the lower control arm mount on the front axle to set correct caster for a wide range of lift...

Upgrade your Bronco's stock upper control arms with these high strength Adventure Pro Series units from Zone Offroad. Designed for use on lifted setups these arms all for increased droop travel, improved strength and great looks. The arms come ready to install right out...

This 5-leaf pack features anti-friction pads and center leaf spacer plates between each leaf to decrease leaf pack internal friction for quiet, smooth operation. These springs are designed to give 6" of lift while maintaining the factory ride. Sold Individually, bushings sold separately.

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

These high quality 4" cast iron lift blocks are specially designed to lift the rear of leaf spring trucks. They come finished in a black e-coating and use a tapered design to help improve pinion angle once installed. Uses 9/16" pin size. Sold in...

These high quality 3" cast iron lift blocks are specially designed to lift the rear of leaf spring trucks. They come finished in a black e-coating and use a tapered design to help improve pinion angle once installed. Uses 9/16" pin size. Sold in...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

These extended length rear sway bar links are designed for use on lifted applications equipped with a factory rear sway bar to improve the sway bar operating angle. They can be used with 4-8" lift kits for the 2008-2016 Ford Super Duty.

Tired of your rear lower shock mounts scraping across rocks when you're out wheeling? These high-clearance mounts raise the lower shock mount a full 3" so that they are even with the bottom of the axle tube, drastically increasing ground clearance. This weld-on bracket...

Take performance to the next level with a set of these sway bar disconnects. Designed to allow you to quickly and easily disconnect the front sway bar to allow for increased front suspension travel and articulation. High strength construction and an adjustable design allows...

When lifting your Jeep JK between 3-4" the front caster needs to be corrected to maintain handling and steering characteristics. These lower cam locks from Zone Offroad are an affordable option to correct caster alignment rather than swapping to aftermarket lower control arms. Fix...

Replace those old, weak, factory shackles and get a little lift at the same time. This slightly-longer-than-stock shackle will help your springs really flex to their full potential travel, while the shackle's beefy construction will reduce side to side movement. These shackles maintain stock...

Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate...

Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8" solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Upgrade your truck's factory upper control arms with these high strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are built from high strength steel, boxed, gusseted and fully...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...