Products Under $500

This bump stop extension kit includes a pair extensions that attach with a 3/8" bolt to create a universal mounting platform very common on Jeeps as well as many other vehicles. Bump stop extensions limit a tire's upward travel into the fender well, limiting...

Take performance to the next level with a set of these sway bar disconnects. Designed to allow you to quickly and easily disconnect the front sway bar to allow for increased front suspension travel and articulation. High strength construction and an adjustable design allows...

These eliminators are designed for use on Jeep models utilizing stem-style shock mounts at the frame (found on XJ, ZJ, TJ, YJ and WJ models) to convert the front upper shock mount into a stronger double shear mount.

Does your 03-06 Jeep Wrangler TJ have a little drive line vibration after installing a lift? This 3/4" transfer case drop kit might just be the answer. Typically used when retaining the stock slip yoke rear driveshaft on 2.5-3" lifts. This system comes with...

If you've added more weight to your JK with bumpers, winches, a tire carrier, etc. you may find you could use a little extra boost in the front or rear. These rear coil spring spacers are designed to give you that extra boost on...

Jeep Wrangler JK's sit about 1.5" low in the front from the factory; add more weight from bumpers, winches, and tire carriers and you may find you could use a little extra boost in the front or rear. These front coil spring spacers are...

When it comes time to replace the upper ball joints in your Zone Offroad upper control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, cotter pin, and snap ring (where applicable) designed for...

Need a little extra boost in the rear of your truck? This add-a-leaf kit will provide additional lift in the rear while maintaining ride quality and increasing load capacity.

You've got the truck you want, now get the level look you want. This easy-to-install 2" strut spacer maintains your factory ride and doesn't require a strut compressor or disassembly of the strut. Fits 2004 - 2008 Ford F-150 Gas models.

Give your RAM 2500/3500 truck that extra boost for larger tires while maintain the ride quality and handling characteristics with this 1.5" body lift from Zone Offroad. This kit raises the body and bumpers up off the frame to allow clearance for larger tires...

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

Prevent front driveline issues on your lifted 2019-2024 Ram 2500 or 3500 truck with the ZoneOffroad transfer case indexing ring kit. At 6" of lift and above it is necessary to index the transfer case to allow the front driveline to reconnect and eliminate...

This transfer case indexing kit repositions the front output flange to eliminate driveline vibrations that can occur at taller lift heights. Featuring a thinner design to maximize spline engagement and improve front driveline angles on 6-bolt transfer case equipped Ram trucks, the included driveshaft...

Prevent front driveline issues on your lifted Diesel powered 2019-2024 Ram 2500 or 2019-2024 3500 truck with the ZoneOffroad transfer case indexing ring kit. At 3" of lift this indexing ring kit allow the front driveline to reconnect and eliminate vibrations. Designed for 6-bolt flange...

Allows customers to install our indexing ring kits onto dually trucks and mega cab trucks by lowering the DEF tank. Works with 4"-8" lifts

Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8” solid steel with eyelets at either end and install with black urethane bushings, sleeves and mounting hardware. Designed for...

If you have installed large tires or a lift and are having tire rubbing problems or other issues related to uncontrolled compression travel, install these bump stops by Zone Offroad for a simple and easy solution. These taller bump stops snap into the factory...

Deck out the truck you've put so much work into. This 2" torsion key leveling kit is a snap to install on your 2002 - 2005 Dodge / Ram 1500 Truck. It's super easy to install and, like every Zone kit, is manufactured and...

Installing a body lift often creates a clear gap between your vehicle's body and frame-mounted bumpers. Be sure to check fitment details before purchasing as our body lift kits are purpose-built for specific vehicles, allowing for easy installation and perfect re-mating of bumper and...