Jeep Wrangler

This 4-leaf pack features anti-friction pads and center leaf spacer plates between each leaf to significantly decrease internal friction. The spring is designed to give 2" of lift for the front or rear of your YJ. Sold individually, bushings sold separately.

Get the look and the performance you want for your Jeep. This 3" Lift Kit for your 4WD 2007 - 2011 Jeep Wrangler (JK) will clear 35" tires and includes heavy-duty coil spacers that offer a dramatic improvement in both ground clearance and wheel...

Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8" solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

This 1" motor mount lift improves post-lift transfer case output shaft / rear axle alignment, while providing increased belly pan clearance and typically eliminating the need for a transfer case drop on Jeep's with a 1-3" body lift. By building upon the factory rubber...

Replace those old, weak, factory shackles and get a little lift at the same time. This slightly-longer-than-stock shackle will help your springs really flex to their full potential travel, while the shackle's beefy construction will reduce side to side movement. These shackles provide 1"...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Want the perfect combination of looks, ground clearance and wheel travel? This 4" Suspension Lift lets you clear 35" tires and the confidence you want when you venture off road with your 2 door 4WD 2012 - 2018 Jeep Wrangler (JK).

Ready for an aggressive look that's ready to tackle the off road? This 4.25 combo lift kit is what you're looking for. This complete system greatly increases droop and wheel travel. You'll easily clear 33" tires with room to twist. Fits 1997 - 2006...

Is your Jeep lifted? Upgrade your factory rear sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8” solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Want the perfect combination of off road performance and on road handling? This 4" Suspension Lift lets you clear 35" tires and have the ground clearance and wheel travel you want when you venture off road. Fits 2 door 4WD 2007 - 2011 Jeep...

Get the clearance you're looking for with this easy and economical 1.25" Body Lift Kit on your 1987 - 1995 Jeep Wrangler (YJ) . This lift won't affect your center of gravity, spring rate or steering geometry, so you can fit the bigger tires...

Want a larger spare tire on your Jeep, but it won't fit on the stock bracket? This bracket moves the tire mounting point up 1-1/2" and out 1-3/16", allowing you to mount up to a 37" tire.

Improve the steering feel of your Jeep Wrangler JL or Gladiator JT with a FOX 2.0 ATS adjustable Steering Stabilizer shock. It's one of the best upgrades you can make. FOX's Adjustable Through Shaft design (ATS) cancels out unwanted steering forces in both directions,...

If your Jeep project can accommodate fixed length front lower control arms, these J-Link non-adjustable arms still provide the benefits of heavy-duty 2" x 1/4" wall DOM tubing and high-performance, premium Clevite® rubber bushings at both ends. Fits Wrangler TJ / LJ, Cherokee XJ...

Installing a body lift often creates a clear gap between your vehicle's body and frame-mounted bumpers. Be sure to check fitment details before purchasing as our body lift kits are purpose-built for specific vehicles, allowing for easy installation and perfect re-mating of bumper and...

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

Take performance to the next level with a set of these sway bar disconnects. Designed to allow you to quickly and easily disconnect the front sway bar to allow for increased front suspension travel and articulation. High strength construction and an adjustable design allows...

Designed for the Jeep Cherokee XJ and Wrangler TJ, but compatible with so many other applications, this bar pin eliminator kit is a great option to convert over from a bar pin style mounting point to the more convenient eyelet bushing for more shock...

Take performance to the next level with a set of these sway bar disconnects. Designed to allow you to quickly and easily disconnect the front sway bar to allow for increased front suspension travel and articulation. High strength construction and an adjustable design allows...