Data-only | Dodge-RAM

The Tazer Ram is an electronic OBD2plug-in device for the following vehicles:2013-2018 Ram 15002013-2021 Ram 25002013-2021 Ram 35002019-2021 Ram 1500 “Classic”Not compatible with the Ram 1500 DT or TRX.

This transfer case drop replaces the factory metal transmission mount with a shorter one to reduce driveshaft angles and vibration; typically used to correct Dodge trucks with 6"+ of lift if experiencing a mild driveshaft vibration.

Prevent front driveline issues on your lifted Diesel powered 2019-2024 Ram 2500 or 2019-2024 3500 truck with the ZoneOffroad transfer case indexing ring kit. At 3" of lift this indexing ring kit allow the front driveline to reconnect and eliminate vibrations. Designed for 6-bolt flange...

Prevent front driveline issues on your lifted Diesel powered 2019-2024 Ram 2500 or 2019-2024 3500 truck with the ZoneOffroad transfer case indexing ring kit. At 6" of lift it is necessary to index the transfer case to allow the front driveline to reconnect and...

Prevent front driveline issues on your lifted Gas powered 2019-2024 Ram 2500 or 3500 truck with the ZoneOffroad transfer case indexing ring kit. At 6" of lift it is necessary to index the transfer case to allow the front driveline to reconnect and eliminate...

This transfer case indexing kit repositions the front output flange and helps eliminate the driveline vibrations that can occur at taller lift heights. The thinner design maximizes spline engagement and improves front driveline angles on 8-bolt transfer case equipped Ram trucks, allowing use of...

Prevent front driveline issues on your lifted 2019-2024 Ram 2500 or 3500 truck with the ZoneOffroad transfer case indexing ring kit. At 6" of lift and above it is necessary to index the transfer case to allow the front driveline to reconnect and eliminate...

Avoid post-lift front-end vibration with help from this transfer case indexing kit. Typically used on Dodge trucks with 6" of lift, "indexing" the front driveshaft effectively reduces the shaft's working angle to eliminate vibration.

This transfer case indexing kit repositions the front output flange to eliminate driveline vibrations that can occur at taller lift heights. Featuring a thinner design to maximize spline engagement and improve front driveline angles on 6-bolt transfer case equipped Ram trucks, the included driveshaft...

When installing taller lift kits on the later model RAM HDs it is necessary to index the transfer case to improve the front output operating angle for reinstallation of the factory front driveshaft. While rare, for trucks equipped with the manual lever-operated transfer case...

This transfer case indexing kit repositions the front output flange and helps eliminate driveline vibrations that can occur at taller lift heights. The thinner design maximizes spline engagement and improves front driveline angles on 6-bolt transfer case equipped Ram trucks, allowing for re-use of...

When it comes time to replace the upper ball joints in your Zone Offroad upper control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, cotter pin, and snap ring (where applicable) designed for...

Upgrade your truck's factory upper control arms with these high-strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are built from high-strength steel, boxed, gusseted and fully welded for...