Chevy | GMC Suspension

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Specially designed for the 2019-2024 Chevy/GMC 1500 AT4 / Trail Boss trucks, these kits are designed to a higher standard, working within the parameters of the factory suspension and steering geometry to maximize potential while allowing optimal clearance for larger tires. Kits include strut...

These high quality 2" fabricated lift blocks are specially designed to lift the rear of later model GM HD trucks. They come finished in a durable textured black powder coat and uses a flat (non-tapered) design. Uses 18mm pin size. Sold in pairs.

Get off the asphalt with this 3" Body Lift Kit. Built around crush proof body blocks capable of holding up to 60,000 lbs., this complete system is everything you need to get the look you want for your 1995 - 1998 Chevy/GM 1500 Truck.

Replacement tie rod end for 15-19 Colorado & Canyon trucks equipped with a Zone 5.5" lift. Includes (1) tie rod end and washer.

When it comes time to replace the upper ball joints in your Zone Offroad upper control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, cotter pin, and snap ring (where applicable) designed for...

Master Service Kit: Include replacement ball joint kit for Zone control arms on 14-21 GM1500 w/ stamped steel/alum arms. Kits include (1) press-in ball joint, snap ring, grease zerk, cotter pin, gasket and new red anodized dust cap to service (1) control arm

Master Service Kit: Include replacement ball joint kit for Zone control arms on 07-17 GM1500 w/ cast steel arms. Kits include (1) press-in ball joint, snap ring, grease zerk, cotter pin, gasket and new red anodized dust cap to service (1) control arm

This 1" transfer case drop will help reduce or eliminate the front driveline vibration from 6" or taller suspension lifts by reducing the driveshaft angles. Front driveline correction typically becomes necessary with 6" of lift or more on 73-80 1/2 ton trucks, Blazers, Jimmy's,...

While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality...

Take the road less traveled when you install this 4.5" Lift Kit that lets you clear 33" tires. This kit will give you an off road worthy truck you can still use as your daily driver. Fits 4WD 2007 - 2013 Chevy/GM 1500 Trucks.

Looking to lift your Chevrolet/GMC 1500 truck but retain the tail high stance. This 2" lift kit from Zone Offroad is designed for quick and easy install using a pair of 2" lower strut spacers, 2" rear lift blocks, U-bolts and hardware to allow...

Lift your truck into a class of its own with this 6" Lift Kit that lets you clear 35" tires. Built for everyday driving but sturdy enough for off-road abuse. Get the look and performance you want out of your RWD 2001 - 2010...

For the full lift kit experience, go beyond a simple leveling and fit up to 33" tires with this kit. This 2" front and rear lift kit includes torsion keys for the front and block and U-bolts for the back. The easy way to...

Take your GM 2500/3500HD to new heights with this 5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to differential relocation and and rear block kit to level out the stance. Get the look, performance, and...

With ample additional ground clearance and room for up to 35" tires, you’ll be well-equipped for a trip down ‘the road less traveled’ with this 4" leaf spring & block lift kit for your classic 1977-1987 GM 1500 truck or SUV.

Installing a body lift often creates a clear gap between your vehicle's body and frame-mounted bumpers. Be sure to check fitment details before purchasing as our body lift kits are purpose-built for specific vehicles, allowing for easy installation and perfect re-mating of bumper and...

Go new places when you install this 3" Body Lift Kit. Built around crush proof body blocks capable of holding up to 60,000 lbs., this complete system is everything you need to get the look you want for your 1988 - 1994 Chevy/GM 1500...

You can take the road less traveled when you install this 3" Body Lift Kit. Built around crush proof body blocks capable of holding up to 60,000 lbs., this complete system is everything you need to get the look you want for your 2001...

Take your truck to new places with this 3" Body Lift Kit. Built around crush proof body blocks capable of holding up to 60,000 lbs., this complete system is everything you need to get the look you want for your 2003 - 2005 Chevy/GM...