Chevy | GMC

Replacement ball joint kit for Zone control arms on 2001-2024 Chevy/GMC HD truck. Kits include (1) press-in ball joint, snap ring, grease zerk, cotter pin and dust cap gasket to service (1) control arm

Need a little extra boost in the rear of your truck? This add-a-leaf kit will provide additional lift in the rear while maintaining ride quality and increasing load capacity.

More than a leveling kit, this 3.5" Adventure Series kit takes advantage of Adventure Series upper control arms to offer improved performance and off-road capability with clearance for up to 35" tires. These high strength UCAs allow for increased suspension travel, improved strength and...

Level out the stance on your Colorado/Canyon with these 1.25" top mounted strut spacers from Zone Offroad. Designed for quick and easy install along with a precision fit, this kit includes a pair of laser cut black e-coated strut spacers along with mounting hardware...

Ready for the big time? Then this is your 6" Lift Kit. Designed for easy installation, value, reliability, and to stand out, which is easy when you can clear 35" tires. Get the look and performance you want out of your 4WD 1999 -...

Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability...

Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to nitro gas struts and and rear block kit to level out the stance. Get the look, performance,...

Turn heads and drop jaws with this 5" lift kit for your truck that gives you clearance for tires up to 35". This kit has everything you need to raise and level your 2011 - 2019 Chevy/GM 2500HD /3500HD truck. If you're going to...

Replacement tie rod end kit for Zone 4-6" equipped 19-24 GM 1500. Kit includes (1) tie rod end.

When it comes time to replace the upper ball joints in your Zone Offroad upper control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, red anodized aluminum dust cap, O-ring, grease zerk fitting,...

Master Service Kit: Include replacement ball joint kit for Zone control arms on 01-24 GM HD. Kits include (1) press-in ball joint, snap ring, grease zerk, cotter pin, gasket and new red anodized dust cap to service (1) control arm

This replacement bushing kit is designed for 88-91 leaf sprung Chevrolet and GMC models equipped with Zone Offroad 4" and 6" lift kits. These durometer specific polyurethane bushings help isolate road noise and help improve suspension performance. Kit includes bushings and sleeves to complete...

Are you trying to clear larger wheels and tires on your 14-18 Chevrolet/GMC 1500 truck and find yourself rubbing on the backside of the fender? When a lift isn't enough to fit aggressive wheel/tire combinations Zone Offroad's fender trim plates may just do the...

Add front end protection to your Zone Offroad 4.5" or 6.5" lift kit equipped Chevrolet or GMC 1500 truck or SUV. These skid plates are build from high strength 10-gauge steel and includes a laser cut Zone logo for styling points. Installs quick and...

This front sway bar shackle link kit converts factory pivot-style sway bar axle mounts to a shackle-type link, preventing the sway bar axle mount from binding and allowing for maximum axle articulation.

Level out the stance on your Chevrolet/GMC 1500 truck or SUV with these 2" lower strut spacers from Zone Offroad. Designed for quick and easy install along with a precision fit, this kit includes a pair of spacers as well as longer mounting hardware...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Take your Chevy Trail Boss / GMC AT4  to new heights with this 4" lift kit from Zone Offroad. This kit nets 4" over stock, so due to the 2" factory lift will sit similar to a standard truck with 6" of lift. Kits...