2014-2018 Chevy Silverado | GMC Sierra 1500

Need a little extra boost in the rear of your truck? This add-a-leaf kit will provide additional lift in the rear while maintaining ride quality and increasing load capacity.

Are you trying to clear larger wheels and tires on your 14-18 Chevrolet/GMC 1500 truck and find yourself rubbing on the backside of the fender? When a lift isn't enough to fit aggressive wheel/tire combinations Zone Offroad's fender trim plates may just do the...

Add front end protection to your Zone Offroad 4.5" or 6.5" lift kit equipped Chevrolet or GMC 1500 truck or SUV. These skid plates are build from high strength 10-gauge steel and includes a laser cut Zone logo for styling points. Installs quick and...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Take your Silverado/Sierra 1500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability...

Level out the stance on your Chevrolet/GMC 1500 truck or SUV with these 2" lower strut spacers from Zone Offroad. Designed for quick and easy install along with a precision fit, this kit includes a pair of spacers as well as longer mounting hardware...

Upgrade your trucks factory upper control arms with these high strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are designed for 07-18 Chevrolet/GMC 1500 trucks and SUVs with...

Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability...

Master Service Kit: Include replacement ball joint kit for Zone control arms on 14-21 GM1500 w/ stamped steel/alum arms. Kits include (1) press-in ball joint, snap ring, grease zerk, cotter pin, gasket and new red anodized dust cap to service (1) control arm

Take the road less traveled when you install this 4.5" Lift Kit that lets you clear 33" tires. This kit will give you an off road worthy truck you can still use as your daily driver. Fits 4WD 2007 - 2013 Chevy/GM 1500 Trucks.

When it comes time to replace the upper ball joints in your Zone Offroad upper control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, red anodized aluminum dust cap, O-ring, grease zerk fitting,...

Replacement ball joint kit for Zone control arms on 14-21 GM1500 w/ stamped steel/alum arms. Kits include (1) press-in ball joint, snap ring, grease zerk, cotter pin and dust cap gasket to service (1) control arm

Level out the stance with this quick and easy to install 2" leveling kit from Zone Offroad. Retains full functionality of MagneRide system. Get the look your truck deserves, while maintaining ride quality with clearance for up to 33" tires.

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

These replacement CV spacers are designed to work with the Zone 6" equipped 01-10 GM HD trucks. Kits include installation hardware.

When it comes time to replace the upper ball joints in your Zone Offroad upper control arms these ball joints are a quick and easy swap. This kit Includes one (1) ball joint with nut, cotter pin, and snap ring (where applicable) designed for...

Master Service Kit: Include replacement ball joint kit for Zone control arms on 07-17 GM1500 w/ cast steel arms. Kits include (1) press-in ball joint, snap ring, grease zerk, cotter pin, gasket and new red anodized dust cap to service (1) control arm

Looking to lift your Chevrolet/GMC 1500 truck but retain the tail high stance. This 2" lift kit from Zone Offroad is designed for quick and easy install using a pair of 2" lower strut spacers, 2" rear lift blocks, U-bolts and hardware to allow...

Take your Silverado/Sierra 1500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability...

Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Get the look, performance, and capability...