1999-2004 Jeep Grand Cherokee | WJ

3" Jeep Bump Stop Extension Kit is comprised of a pair of 1 pc 3" billet aluminum bump stop spacers and mounting hardware. Another great solution form JKS Manufacturing. These extension spacers attach to the front coil spring axle mounts of Jeep JK, TJ,...

Is your Jeep in need of a little boost to compensate for a heavy bumper-mounted winch and/or to clear a larger tire? These 3/4" coil spring spacers are specially designed for use on the front + rear of Wrangler TJ and Grand Cherokee ZJ,...

Does your 99-04 Jeep Grand Cherokee have a little drive line vibration after installing a lift? This 3/4" transfer case drop kit might just be the answer. Typically used with 3-4" lifts when the stock slip yoke rear driveshaft is retained. This system comes...

Want the perfect combination of looks, ground clearance and wheel travel? This 4" Suspension Lift lets you clear 32" tires and the confidence you want when you venture off road with your 4WD 1999 - 2004 Jeep Grand Cherokee (WJ).

Enhance your Wrangler TJ, LJ, or Cherokee XJ Jeep with JKS J-Flex adjustable front upper Control Arms. CNC-bent from DOM tubing for proper tire, frame and axle mount clearance, these front upper control arms feature forged flex ends that are adjustable. The design increases...

Upgrade your Jeep Wrangler TJ, LJ or Grand Cherokee ZJ performance and reliability with JKS J-Flex adjustable rear upper control arms. CNC-bent from stout DOM tubing, the fully adjustable design allows you to fine-tune suspension geometry. The ends are also fully rebuildable and greaseable....

Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate...

Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent...

Perfect for lifted Jeep Wrangler TJ or LJ, install an adjustable rear track bar with relocation bracket for proper rear axle alignment. It's a superior quality replacement for an original fixed-length Panhard rod. The adjustable length design helps you to properly align your axle...

Upgrade your factory front track bar for improved strength, control, and axle positioning with this heavy duty adjustable replacement track bar. Designed for easy installation and fine adjustment, this track bar allows you to recent the front axle with a wide range of lift...

Dial in the front alignment caster positioning with these alignment cam bolts. These can be used on Jeep TJ and ZJ models and install on the lower control arm mount on the front axle to set correct caster for a wide range of lift...

At full articulation off-road your Jeep has the potential to unseat which could lead to being stranded on the trail. This issue is even more apparent with certain aftermarket lift kits that use longer shocks and adjustable control arms designed for increased articulation. The...

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

If your Jeep project can accommodate fixed length front lower control arms, these J-Link non-adjustable arms still provide the benefits of heavy-duty 2" x 1/4" wall DOM tubing and high-performance, premium Clevite® rubber bushings at both ends. Fits Wrangler TJ / LJ, Cherokee XJ...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Built specifically to compliment your Zone lift kit, FOX's proven damping technology provides a comfortable on-road ride and predictable off-road handling in a variety of conditions. Their monotube design uses an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen-charged...

Jeep TJ Adjustable Track BarJKS adjustable front track bar for Jeep Wrangler TJ, LJ, MJ, XJ, ZJ provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, .250"- wall...