1993-1998 Jeep Grand Cherokee | ZJ

While many vehicles come equipped from the factory with a steering stabilizer, the small cylinder isn't up to the task of controlling oversized tires. Zone Offroad offers upgraded steering stabilizer options to enhance vehicle control by reducing steering shimmy and bump steer. These quality...

Control arm bushing kit designed specifically for Zone Offroad Jeep TJ, XJ, or ZJ lower control arms. This kit will fit the front and rear arms of the TJ or ZJ kits and the front arms on the XJ and MJ kits. One kit...

Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent...

Want the perfect combination of looks, off road performance and on road handling? This 4" Suspension Lift lets you clear 32" tires and have the ground clearance and wheel travel you want when you venture off road. Fits 4WD 1993 - 1998 Jeep Grand...

Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8” solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

The track bar (aka Panhard bar) keeps the axle centered under a vehicle; once lifted, an unadjusted trackbar will pull the axle to one side or another. This bracket will correct post-lift track bar geometry to correct axle alignment.

These cam locks are easy to install and will reduce driveline vibrations. Unlike a cam bolt, these can't slip and allow your pinion angle to change. Why spend big money on a slip yoke eliminator and driveshaft when a simple cam lock can eliminate...

At full articulation off-road your Jeep has the potential to unseat which could lead to being stranded on the trail. This issue is even more apparent with certain aftermarket lift kits that use longer shocks and adjustable control arms designed for increased articulation. The...

Is your Jeep in need of a little boost to compensate for a heavy bumper-mounted winch and/or to clear a larger tire? These 3/4" coil spring spacers are specially designed for use on the front + rear of Wrangler TJ and Grand Cherokee ZJ,...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate...

You've got the Jeep you want, now get the look you want. This easy-to-install 2" Lift Kit comes with front and rear coil spring isolators and 4 shocks valved specifically for your 1993 - 1998 Jeep Grand Cherokee (ZJ) models.

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

Dial in the front alignment caster positioning with these alignment cam bolts. These can be used on Jeep TJ and ZJ models and install on the lower control arm mount on the front axle to set correct caster for a wide range of lift...

Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8" solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

Does your 93-98 Jeep Grand Cherokee have a little drive line vibration after installing a lift? This 3/4" transfer case drop kit might just be the answer. Typically used with 3-4" lifts when the stock slip yoke rear driveshaft is retained. This system comes...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Perfect for lifted Jeep Wrangler TJ or LJ, install an adjustable rear track bar with relocation bracket for proper rear axle alignment. It's a superior quality replacement for an original fixed-length Panhard rod. The adjustable length design helps you to properly align your axle...