Popular Searches
6” Lift Kit
2021-2024 Ford F-150 2wd
From $1,325.70
Take your 21-24 F150 2wd to new heights with this 6" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Engineered to the highest standard to maintain ride quality and handling performance. Get the look, performance, and capability your truck deserves with clearance for 35-37" tires.
Quick Specs
37 x 12.5
Max Tire Size
6"
Front Lift Height
8-10 hrs
Installation Time
Overview
Front Lift Height | 6" |
Material | Steel |
Front Lift Method | Knuckle & Strut Spacer |
Rear Lift Method | Block Kit |
Lift Type | Lift Kit |
Wheel Size | See Notes |
Back Spacing | See Notes |
Max Tire Size | 37 x 12.5 |
Finish | Powdercoat |
Cutting Required | Yes |
Accommodates Factory Wheels | See Notes |
Welding Required | No |
Features
- Kit design optimizes ground clearance and improves offroad protection.
- Maintains drivability and handling by correcting suspension, steering and driveline geometry.
- Redesigned steering knuckles specific to the 2021-2022 F150 to maintain ESC system compliance.
- 3" or 4" replacement rear lift blocks available to achieve desired stance without the need to stack lift blocks.
- Kits includes Factory Protection Plus (ESC system compatibility, Limited lifetime warranty, 5yr-60k mile drivetrain warranty).
- Kit allows clearance for 35" tires
All In The Details
- Some trucks with a 2-piece drive shaft may have a recall from Ford regarding the rear drive shaft.
- (Safety Recall 21S25) Due to the recall procedure, Zone Offroad recommends having this performed prior to installing the lift.
- 18" or larger diameter wheels required. Stock 17" and 18" wheels cannot be reinstalled. Stock 20’ wheels can be used with up to a 305/60R20 tire.
- 18" wheels with 5-5.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle/tie rod. 18 - 20"wheels with 5.5-5.75" of backspacing is highly recommended for tire to frame crash bar clearance. 37" tires will require crash bar modification.
- Models with 2-piece rear driveshaft WILL require carrier bearing shim kit D5405 (not included w/ kit).
- Block kits replace factory 1-1/4” block. Stock block will not be reinstalled.
- Crash bars may require modification based on wheel and tire choice.
- It is the end user's responsibility to ensure modifications are non-detrimental to vehicle safety.
- Does not fit diesel models.
- Does not fit Tremor models.
- Requires frame bracket modification
Specifications
Install Time Hours | 8-10 hrs |
Difficulty Level |
4 out of 5
Requires some frame modification, cutting and/or welding, driveline or exhaust modifications required. |
Required Tools
- Reciprocating Saw
- 204-592 Ball Joint Separator (Recommended)
- Tie Rod End Separator (Recommended)
- Torque Wrench
- 1 - 1/16" Socket / Wrench
- 2021 Ford F-150 King Ranch RWD GAS
- 2021 Ford F-150 Lariat RWD GAS
- 2021 Ford F-150 Limited RWD GAS
- 2021 Ford F-150 Platinum RWD GAS
- 2021 Ford F-150 SSV RWD GAS
- 2021 Ford F-150 L RWD GAS
- 2021 Ford F-150 LT RWD GAS
- 2022 Ford F-150 King Ranch RWD GAS
- 2022 Ford F-150 Lariat RWD GAS
- 2022 Ford F-150 Limited RWD GAS
- 2022 Ford F-150 Platinum RWD GAS
- 2022 Ford F-150 SSV RWD GAS
- 2022 Ford F-150 L RWD GAS
- 2022 Ford F-150 LT RWD GAS
- 2023 Ford F-150 King Ranch RWD GAS
- 2023 Ford F-150 Lariat RWD GAS
- 2023 Ford F-150 Limited RWD GAS
- 2023 Ford F-150 Platinum RWD GAS
- 2023 Ford F-150 SSV RWD GAS
- 2023 Ford F-150 L RWD GAS
- 2023 Ford F-150 LT RWD GAS
From $1,305.70+ taxes
VIEW SUMMARY
HIDE SUMMARY