BDS
Selecting a BDS lift gives you peace of mind knowing that our parts fit and perform as close to the original equipment as possible.
JKS
Since 1989, JKS Manufacturing has developed some of the world’s most widely used and respected products for Jeep® vehicles.
RT Pro
Made in the USA: Michigan-designed, tested & manufactured. Made to last: race tested. Made for riders: engineered & built by those who ride.
Popular Searches
6” Radius Arm Lift Kit
2008-2010 Ford F250/F350 Super Duty 4WD (Gas)
From $1,268.65
When you go big you can go anywhere. This 6" Radius Arm Lift Kit puts your truck into a class of its own, letting you clear huge 37" tires. Get the look and performance you want out of your 4WD 2008 - 2010 Ford F-250 / F-350.
Quick Specs
37 x 12.5
Max Tire Size
6"
Front Lift Height
4"
Rear Lift Height
6 hrs
Installation Time
Overview
| Front Lift Height | 6" |
| Rear Lift Height | 4" |
| Material | Metal |
| Front Lift Method | Coil Springs & Replacement Radius Arms |
| Rear Lift Method | Dual Add-A-Leafs & Block Kit |
| Lift Type | Lift Kit |
| Wheel Size | 17 x 9 |
| Back Spacing | 4.5" |
| Max Tire Size | 37 x 12.5 |
| Wheel Size 2 | 18 x 9 |
| Back Spacing 2 | 4.5" |
| Max Tire Size 2 | 37 x 12.5 |
| Wheel Size 3 | 20 x 9 |
| Back Spacing 3 | 4.5" |
| Max Tire Size 3 | 37 x 12.5 |
| Finish | Powdercoat |
| Cutting Required | No |
| Accommodates Factory Wheels | See Notes |
| Welding Required | No |
Features
- Brake line relocation brackets allow re-use of factory brake lines.
- Bump stop extensions properly limit up-travel, protecting your vehicle.
- Dual rear Add-A-Leaf Kit provides additional lift and improves weight capacity.
- Heavy-duty radius arms improve strength, allow additional tire clearance and increase ground clearance over radius arm drop kits.
- High-strength, 1/4" steel radius arms correct caster, improve tire clearance, and maximize ground clearance.
- Rear lift block and longer U-bolts for easy installation and level stance.
- Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics.
- Sway bar relocation brackets maintain operating angle for reduced body roll.
All In The Details
- Driveline: Although extremely rare, front and/or rear driveline vibration may occur and require driveline modification.
- Factory wheels fit when paired with factory / original equipment tire size.
- Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
- Lift Block Selection: This lift will require replacing your truck’s factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block.
- Mod's Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Specifications
| Install Time Hours | 6 hrs |
| Difficulty Level |
3 out of 5
Automotive mechanical experience recommended, some specialty tools required, adjustment may be necessary, minor cutting. |
- 2008 Ford F-250 Super Duty 4WD Gas
- 2008 Ford F-350 Super Duty 4WD Gas
- 2009 Ford F-250 Super Duty 4WD Gas
- 2009 Ford F-350 Super Duty 4WD Gas
- 2010 Ford F-250 Super Duty 4WD Gas
- 2010 Ford F-350 Super Duty 4WD Gas
From $1,268.65+ taxes
6” Radius Arm Lift Kit
2008-2010 Ford F250/F350 Super Duty 4WD (Gas)
From $1,268.65+ taxes
VIEW SUMMARY
HIDE SUMMARY