BDS
Selecting a BDS lift gives you peace of mind knowing that our parts fit and perform as close to the original equipment as possible.
JKS
Since 1989, JKS Manufacturing has developed some of the world’s most widely used and respected products for Jeep® vehicles.
RT Pro
Made in the USA: Michigan-designed, tested & manufactured. Made to last: race tested. Made for riders: engineered & built by those who ride.
Popular Searches
4” Standard Lift Kit
From From $1,336.23
Take your RAM 3500 to new heights with this 4" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arm relocation brackets to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires
Quick Specs
37 x 12.5
Max Tire Size
4"
Front Lift Height
2" or 3"
Rear Lift Height
6 hrs
Installation Time
Overview
| Front Lift Height | 4" |
| Rear Lift Height | 2" or 3" |
| Material | 1/4" Steel |
| Front Lift Method | Coil Springs |
| Rear Lift Method | Block Kit |
| Lift Type | Suspension |
| Wheel Size | 20 x 9 |
| Back Spacing | 5.5" |
| Max Tire Size | 37 x 12.5 |
| Wheel Size 2 | 20 x 9 |
| Back Spacing 2 | 4.5" |
| Max Tire Size 2 | 35 x 12.5 |
| Finish | Powdercoat |
Features
- High strength progressive rate front coil springs for a great ride on any terrain
- HD radius arm drop brackets to correct suspension geometry
- HD track bar relocation bracket to correctly position front axle under the truck
- Forged drop pitman arm to correct steering angles
- Front sway bar correction to maintain handling performance
- HD transmission crossmember and t-case indexing ring to correct front driveline angles
- Nitro series gas or FOX adventure series IFP gas shocks to improved ride and offroad performance
- Allows clearance for up to 37” tires
All In The Details
- - Will not fit Cab and Chassis models
- - Will NOT fit rear air-ride equipped models
- - Gas models only
- - Exhaust modification is required to clear front driveshaft. Vehicle can be driven w/o front driveshaft to an exhaust shop.
- - Does not fit Vehicles with a Manual Shift Transfer Case
- - Trucks equipped with a 2-piece rear driveshaft require carrier bearing shim kit D5406 (not included with kit)
Specifications
| Install Time Hours | 6 hrs |
| Difficulty Level |
4 out of 5
Requires some frame modification, cutting and/or welding, driveline or exhaust modifications required. |
- 2019 Ram 3500 4WD GAS
- 2020 Ram 3500 4WD GAS
- 2021 Ram 3500 4WD GAS
- 2022 Ram 3500 4WD GAS
From $1,336.23+ taxes
VIEW SUMMARY
HIDE SUMMARY