BDS
Selecting a BDS lift gives you peace of mind knowing that our parts fit and perform as close to the original equipment as possible.
JKS
Since 1989, JKS Manufacturing has developed some of the world’s most widely used and respected products for Jeep® vehicles.
RT Pro
Made in the USA: Michigan-designed, tested & manufactured. Made to last: race tested. Made for riders: engineered & built by those who ride.
Popular Searches
4” Radius Arm Lift Kit
2008 - 2010 Ford F-250 / F-350 - 4WD / Gas
From $937.70
With ample additional ground clearance and room for up to 33" tires, you’ll be well-equipped for a trip down ‘the road less traveled’ with this 4" Radius Arm Lift Kit, with rear block lift kit for your 4WD 2008 - 2010 Ford F-250 / F-350.
Kits that Fit
Can you take it higher?
Quick Specs
35 x 12.5
Max Tire Size
4"
Front Lift Height
5"
Rear Lift Height
6 hrs
Installation Time
Overview
| Front Lift Height | 4" |
| Rear Lift Height | 5" |
| Front Lift Method | Radius Arm Drop |
| Rear Lift Method | Cast Blocks |
| Lift Type | Lift Kit |
| Wheel Size | 17 x 9 |
| Back Spacing | 4.5" |
| Max Tire Size | 35 x 12.5 |
| Wheel Size 2 | 18 x 9 |
| Back Spacing 2 | 4.5" |
| Max Tire Size 2 | 35 x 12.5 |
| Wheel Size 3 | 20 x 9 |
| Back Spacing 3 | 4.5" |
| Max Tire Size 3 | 35 x 12.5 |
| Is Adjustable | No |
| Finish | Powdercoat |
| Cutting Required | No |
| Accommodates Factory Wheels | See Notes |
| Welding Required | No |
Features
- Full length replacement coil springs add additional ride height while maintaining ride quality.
- Heavy-duty track bar re-centers front axle, adds strength and limits lateral movement.
- High-strength, 1/4" steel construction corrects caster, improves tire clearance, and maximizes ground clearance.
- High-strength, black e-coated U-bolts.
- Rear lift block and longer U-bolts for easy installation and level stance.
All In The Details
- Check Your Rear Springs: If your vehicle is equipped with both a stock 4" rear block and a top mounted overload/helper spring, select the longer 18.5" Rear U-Bolts.
- Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
- Lift Block Selection: This lift will require replacing your truck’s factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block.
- Mod's Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Specifications
| Install Time Hours | 6 hrs |
| Difficulty Level |
2 out of 5
Minimal automotive mechanic experience, requires floor jack and jack stands, basic tools required. |
- 2008 Ford F-250 Super Duty 4WD Gas
- 2008 Ford F-350 Super Duty 4WD Gas
- 2009 Ford F-250 Super Duty 4WD Gas
- 2009 Ford F-350 Super Duty 4WD Gas
- 2010 Ford F-250 Super Duty 4WD Gas
- 2010 Ford F-350 Super Duty 4WD Gas
From $937.70+ taxes
VIEW SUMMARY
HIDE SUMMARY