1999-2004 Jeep Grand Cherokee | WJ

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

Is your Jeep lifted? Upgrade your factory front sway bar links to improve operating angle for improved on-road handling and performance. These links are built from high strength 5/8" solid steel with eyelets at either end and install with black urethane bushings, sleeves and...

These cam locks are easy to install and will reduce driveline vibrations. Unlike a cam bolt, these can't slip and allow your pinion angle to change. Why spend big money on a slip yoke eliminator and driveshaft when a simple cam lock can eliminate...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features...

Dramatically improve articulation up to 30% on your stock or modified 1993-1998 Jeep Grand Cherokees ZJ with 0-1.5" lift with Quicker Disconnect Sway Bar End Links. Quick-release pins make it easy to decouple your sway bar when you get to the edge of the...

Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and...

We cannot understate the importance of getting your steering geometry setup correctly when adding a lift. These heavy-duty, one-piece, forged Pitman arms will reduce drag link angles to improve your handling by matching the angle of your track bar.

Perfect for lifted Jeep Wrangler TJ or LJ, install an adjustable rear track bar with relocation bracket for proper rear axle alignment. It's a superior quality replacement for an original fixed-length Panhard rod. The adjustable length design helps you to properly align your axle...

Jeep TJ Adjustable Track BarJKS adjustable front track bar for Jeep Wrangler TJ, LJ, MJ, XJ, ZJ provides added strength and adjustability. Fine tune track bar length to suit your combination of suspension components and ride height. Features precision 1-1/4" fine threads, .250"- wall...

Eliminate a common weak link on your Jeep Wrangler TJ or LJ, by upgrading the front lower shock mounts with JKS bar pin eliminators. The standard bar pin design used by most manufacturers provides no lateral support of the shock absorber bushings. Excessive movement...

Convert the weak stem type shock mounts on your Jeep Wrangler TJ, LJ or JK to accept standard EB1 eyelet-style shock absorbers with JKS conversion brackets. Massive 7/8 in. mounting studs provide ultimate strength and security. Lowers the upper shock mount 1.10 in. for...

Install JKS Quicker Disconnect Sway Bar End Links on your 99-04 Jeep Grand Cherokee WJ for up to 30% more suspension articulation. Fits vehicles with 4" to 6" lift. Quick-release pins make it easy to decouple and reconnect your sway bar. Made in the...

The for your 99-04 Jeep Grand Cherokee WJ can go further off road with a set of JKS Quicker Disconnect sway bar links. Fits vehicles with 0-3.5" lift. Quicker Disconnect sway bar end links provide serious articulation. Quick-release pins make it easy to decouple...

Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and...

Upgrade your Jeep Wrangler TJ, LJ or Grand Cherokee ZJ performance and reliability with JKS J-Flex adjustable rear upper control arms. CNC-bent from stout DOM tubing, the fully adjustable design allows you to fine-tune suspension geometry. The ends are also fully rebuildable and greaseable....

If your Jeep project can accommodate fixed length front lower control arms, these J-Link non-adjustable arms still provide the benefits of heavy-duty 2" x 1/4" wall DOM tubing and high-performance, premium Clevite® rubber bushings at both ends. Fits Wrangler TJ / LJ, Cherokee XJ...

3" Jeep Bump Stop Extension Kit is comprised of a pair of 1 pc 3" billet aluminum bump stop spacers and mounting hardware. Another great solution form JKS Manufacturing. These extension spacers attach to the front coil spring axle mounts of Jeep JK, TJ,...

Increase your Jeep Wrangler TJ or LJ off-road performance with stackable rear bump stop spacers. This variable height landing pad spacer system ensures correct bump stop clearance for virtually any lift and tire combination. Includes three interlocking and interchangeable spacers. This solution allows you...