tap to open/closeSearch by Vehicle

2" Spring Spacer Lift Kit

2007-2018 Wrangler JK

Zone Offroad J2203
2" Spring Spacer Lift Kit
2" Spring Spacer Lift Kit
2" Spring Spacer Lift Kit
2" Spring Spacer Lift Kit

Zone Offroad

p/n J2203

Base Price



VIEW Kit Components

Availability: In-Stock
This product usually ships within 24 hours and may ship today if ordered before 1pm est.

Quick Specs

View J2203 Instructions

View Product Warranty

Featured Technology & Benefits

  • Front and rear coil spring isolators with application specific durometer urethane is used to add lift as well as absorb vibration and harsh impacts
  • Front & rear bump stop extensions are included to protect your original coil springs
  • New Zone front and rear shocks are available below in the shock upgrade package. These Zone shocks are specifically valved for your JK!

Zone Offroad doesn't design just spacer kits, we design suspension systems. To maximize performance, a lot of testing was done to ensure the correct durometer material was used to maximize vibration absorption and absorb harsh impacts while ensuring they are tough enough to last the life of your vehicle. In addition to using the perfect durometer material, a UV stabilizer was added to ensure the material wouldn't break down over time.

After the perfect spacer was created, Zone Offroad didn't forget about the bump stops. Many companies sell just the spacers without including bump stops or bump stop extensions. The factory coil spring was never designed to collapse farther than the factory wheel travel, so not installing extended bump stops may drastically reduce the life of your factory coil springs. Zone Offroad bump stop extensions can handle any impact that you can handle while driving it. We know this for a fact!

"Thanks again for being customer satisfaction oriented...." Josh Katykolin

Important Notes!

  • This system works for the 2 door, 4-door and Rubicon models.
  • The rear track bar relocation bracket J5308 is recommended if stock wheels are used with this system to increase tire clearnce to the rear fender well.
  • 2012-18 models using the stock front driveshaft gain more driveshaft to exhaust clearance with exhaust extension kit J5305 listed in the accessories.

This product fits the following applications:

  • 07-18 Jeep Wrangler JK 4WD Gas
Click to view by year
  • 2007 Jeep Wrangler JK 4WD Gas
  • 2008 Jeep Wrangler JK 4WD Gas
  • 2009 Jeep Wrangler JK 4WD Gas
  • 2010 Jeep Wrangler JK 4WD Gas
  • 2011 Jeep Wrangler JK 4WD Gas
  • 2012 Jeep Wrangler JK 4WD Gas
  • 2013 Jeep Wrangler JK 4WD Gas
  • 2014 Jeep Wrangler JK 4WD Gas
  • 2015 Jeep Wrangler JK 4WD Gas
  • 2016 Jeep Wrangler JK 4WD Gas
  • 2017 Jeep Wrangler JK 4WD Gas
  • 2018 Jeep Wrangler JK 4WD Gas

Quick Specs

  • Front Lift Height: 2″
  • Front Lift Method: Coil Spacers
  • Rear Lift Height: 2″
  • Rear Lift Method: Coil Spacers
  • Install Time Hrs: 3
  • Difficulty Level 1-5: 2
  • Wheel Size: 16 x 8
  • Back Spacing: 4.5″
  • Max Tire Size: 33 x 12.50

Click/tap photo or caption to open high resolution image [3000x2000, 1500x1000 or 660x440] in a new window.

When used for commercial purposes, Zone Offroad images may only be used to promote Zone Offroad and its products. Redistribution or duplication of these images without the express written consent of Zone Offroad is strictly prohibited.

2" Spring Spacer Lift Kit

2" Spring Spacer Lift Kit

2" Spring Spacer Lift Kit

2" Spring Spacer Lift Kit

Build Your Kit

After you've selected everything you need for your next project, you can add it to your cart or place it in your garage (You must be logged in to your Zone account to use garage).

Click/tap thenext to selections and accessories for details if available.

Required Vehicle/Kit Selections

Tap to toggle detailsVehicle Specific Requirement

Vehicle Specific Requirement Required for 2012-2018 models when using the stock front driveshaft

Optional Upgrades & Accessories

Tap to toggle detailsShocks - Front

Shocks - Front
Image shows both Zone Nitro Series & Fox Adventure Series Shocks.

Tap to toggle detailsShocks - Rear

Shocks - Rear
Image shows both Zone Nitro Series & Fox Adventure Series Shocks.

Tap to toggle detailsSteering Upgrades

Steering Upgrades
Image shows pn#7400 - Single Steering Stabilizers

Tap to toggle detailsSuspension Parts

Suspension Parts
Add JKS Manufacturing J-FLEX Adjustable Control Arms for the ultimate control arm upgrade on your Zone equipped JK Compatible with 0 to 6.0 in. suspension lifts using OE attachment points.

Control arm design varies depending on specific arm location

Tap to toggle detailsSuspension Parts

Suspension Parts
Image shows Front Adjustable Track Bar (pn# 5411)

Tap to toggle detailsAccessories and Upgrades Selection

Accessories and Upgrades Selection

The J-Cal programmer is an easy to use, digital screen, handheld plug-in programmer that is capable of correcting your speedometer for tire sizes up to 42", and for gear/axle swaps up to 5.38s, with many other features built-in to improve the on-road and offroad performance of your JK Wrangler.

-Corrects speedometer for tire sizes up to 42"

-Speedometer recalibration for gear /axle swaps up to 5.38s

-Locking axle options with transfer case in 4-Hi & 4-Low (07-15 Rubicon only)

-Engine idle adjustability for winching

-ESP stability optimization (11-15 automatic transmission models only)

-Daytime running light options (07-15 models only)

-Horn chirp and exterior lighting flash options when locking doors with keyless entry

-One touch lane change

-TPMS Options (Download required)

-Radio delay options (11-15 models only)

-Headlamp delay options (11-15 models only)

-Reads and clears diagnostic trouble codes

-Internet updatable

-Upgradable to allow performance tuning (07-14 models only)

Tap to toggle detailsAccessories and Upgrades Selection

Accessories and Upgrades Selection
JKS Flex Connect Link Kit and Flex Connect Performance Spring Kit for Jeep Wrangler JK w/ 2" - 5" of lift. The Flex Connect is unlike any other sway bar link on the market today.
Developed jointly with PAC Racing Springs, this patent pending design creates a dual-rate sway bar system when used with the factory or aftermarket sway bar. PAC Racing Springs designed the Flex Connect springs to handle hundreds of thousands of cycles and maintain maximum performance. These springs are housed in a precision machined aluminum body and utilize a steel alloy link rod.
The attention to design details stretches to the ends where the industry famous JKS spherical sway bar link bushings are installed in greaseable aluminum ends. The aluminum link is anodized for long term good looks and corrosion resistance.
The Flex Connect is a huge leap forward from a traditional sway bar link. With the specially turned PAC springs, the link is able to extend and compress, working with the factory sway bar to control body roll. The Flex Connect improves the way the stock bar absorbs imperfections in the road (or offroad surface) by soaking up "head bobble" inducing bumps. The Flex Connect also improves the articulation of the JK suspension over the stock setup. The Flex Connect springs compress and extend under load, giving the same effect as if the sway bar was twisting further and allowing the suspension to articulate more.
For those looking to get the ultimate performance out of the Flex Connect link, the optional Performance Spring Kit allows for roll stiffness to be adjusted using one of the 3 unique replacement spring sets. These springs are tuned to work in different terrains or vehicle setups. The Performance Spring kit includes tools and instructions to swap out the pre-installed OE springs with any of the 3 optional spring sets. Choices can be made based on terrain or even how the Jeep is equipped for a particular trip. As the spring set rates get softer they have more travel, increasing the suspensions ability to articulate. Below, each spring spec and function is detailed. This is a guide to get started adjusting the roll stiffness of the Flex Connect system.

Flex Connect Kit Base Spring
OE Spring (Pre-installed in the Flex Connect)
- Effective spring rate is 35% softer than factory, 1.1" total link travel
- Closest spring to a stock fixed length sway bar link. Maintains road manners while still giving the benefit of absorbing the "head-bobble" type bumps
- Changes your stock sway bar system into a dual rate system.

Optional Performance Spring Kit Includes (Available Seperately Below: PN 2100):
Red Spring (Road)
- Effective spring rate is 45% softer than factory, 1.3" total link travel
- High Rate/Low Travel
- For those looking to maintain on road manners but gain a little more Flex Connect travel and forgiveness over the preinstalled OE spring. Also a great choice to higher speed offroad situations
Yellow Spring (Trail)
- Effective spring rate is 60% softer than factory, 1.6" total link travel
- Mid Rate/Mid Travel
- For those looking to venture off the trail for mild offroading at moderate speeds
Blue Spring (Crawl)
- Effective spring rate is 75% softer than factory, 2.3" total link travel
- Low Rate/High Travel
- For playing in the rocks and off-camber situation. Gives more suspension articulation then a stand link/sway bar setup while maintaining the stability of the sway bar.

Full Product Details and Video

Tap to toggle detailsAccessories and Upgrades Selection

Accessories and Upgrades Selection
If you want a larger fullsize spare tire on your jeep, but it won't fit on the stock bracket, here is your solution. This bracket will allow up to a 37" tire to be mounted on the stock spare tire carrier by moving the tire mounting point up 1-1/2" and out 1-3/16". It is designed for the JK 5 on 5" bolt pattern.

Tap to toggle detailsShock Boots

Shock Boots
Image shows Black Shock Boot (pn# U3100)

Total base price + selected options $129.99

Add to Cart

Bill Me Later Financing