tap to open/closeSearch by Vehicle

08 Dodge Ram 2500/3500

8" Suspension System

Zone Offroad D30N/D31N
Zone D30/D31 Suspension Lift Kit for 2008 Dodge Ram 2500/3500
Zone D30/D31 Suspension Lift Kit for 2008 Dodge Ram 2500/3500

Zone Offroad

p/n D30N/D31N

Base Price


Build/Buy This Kit

Availability: In-Stock
This product usually ships within 24 hours and may ship today if ordered before 1pm est.

Quick Specs

View Zone Offroad D30N/D31N Instructions

View Product Warranty

Featured Technology & Benefits

  • Unique upper and lower control arm relocation bracket design.
  • Heavy 1/4" steel construction.
  • No cutting of the frame required.
  • High performance at a low price.

This new Zone Offroad 8" suspension system for the 2008 Dodge Ram 2500/3500 is performance packed and budget friendly for those looking to get 38" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control.

In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available so for trucks featuring a stock 2-piece rear driveshaft.

Important Notes!

  • 2-piece rear driveshaft requires carrier bearing drop kit D5505
  • Will not fit dually applications
  • Rear axle diameter will be 3.5" or 4", measure before ordering
  • Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary
  • Depending on the factory transmission mount, in rare cases some 8" kits may not require the transfer case indexing kit. See installation instructions for details.
  • Lift springs are designed for diesel models only.

This product fits the following applications:

  • 08 Dodge/Ram Ram 2500 4WD Diesel
  • 08 Dodge/Ram Ram 3500 4WD Diesel
Click to view by year
  • 2008 Dodge/Ram Ram 2500 4WD Diesel
  • 2008 Dodge/Ram Ram 3500 4WD Diesel

Quick Specs

  • Front Lift Height: 8″
  • Front Lift Method: Coil Springs
  • Rear Lift Height: 5″
  • Rear Lift Method: Block Kit
  • Install Time Hrs: 6-8
  • Difficulty Level 1-5: 3
  • Wheel Size: 17 X 9
  • Back Spacing: 4.5-5″
  • Max Tire Size: 38 X 13.50

Click/tap photo or caption to open high resolution image [3000x2000, 1500x1000 or 660x440] in a new window.

When used for commercial purposes, Zone Offroad Products images may only be used to promote Zone Offroad and its products. Redistribution or duplication of these images without the express written consent of Zone Offroad is strictly prohibited.

Zone D30/D31 Suspension Lift Kit for 2008 Dodge Ram 2500/3500

Zone D30/D31 Suspension Lift Kit for 2008 Dodge Ram 2500/3500

Build Your Kit

After you've selected everything you need for your next project, you can add it to your cart or place it in your garage (You must be logged in to your Zone account to use garage).

Click/tap thenext to selections and accessories for details if available.

Required Vehicle/Kit Selections

Vehicle Type/Specs

Driveline Adjustment

Optional Upgrades & Accessories

Steering Upgrades

Bumpers & Sliders

Shock Boots

Total base price + selected options $1,357.23

Add to Cart

Bill Me Later Financing