tap to open/closeSearch by Vehicle

17-18 Ford F-150 4WD

6" Suspension System

Zone Offroad F53N
6" Suspension System
6" Suspension System
6" Suspension System
35x12.50x20 Dick Cepek FCII Tires w/ 20x9 Eagle Alloy Wheels (5" BS)
Zone 6" System | 20x10 Fuel Mavericks | 35x12.50 Nitto Trail Grapplers
Zone 6" System | 20x10 Fuel Mavericks | 35x12.50 Nitto Trail Grapplers
Zone 6" System | 20x10 Fuel Mavericks | 35x12.50 Nitto Trail Grapplers

Zone Offroad

p/n F53N

Base Price

$1,363.59

Build/Buy This Kit

Availability: In-Stock
This product usually ships within 24 hours and may ship today if ordered before 1pm est.

Quick Specs

View Zone Offroad F53N Instructions

View Product Warranty

FMVSS No.126 compliant

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well.

Zone Offroad Products is leading the industry by independently testing all suspension kits to verify the kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Featured Technology & Benefits

  • Front and rear heavy duty 1-piece lower control arm crossmembers
  • Massive ductile cast iron steering knuckles
  • Full differential relocation bracket system included to properly correct CV shaft angles
  • Includes bolt-on strut spacers - strut disassembly not required
  • New eccentric cam bolts included for easy alignment
  • Includes sway bar relocation brackets to acheive optimum position for sway bar
  • 1/4" thick differential skid plate included
  • 5" Rear Blocks with integrated bump stop wings to acheive a more level stance
  • Rear Hydro shocks included - Nitro shocks upgrade is available.
  • Max recommended tire size: 37x12.50 (see tire/wheel fitment below)

Zone Offroad 2017-18 Ford F150 4wd 6" Suspension System. This new system for the redesigned 2015 aluminum-bodied F150s shares all of the great features of the current Zone 6" system for the 2014 model trucks.

The system is built around 2 heavy duty 1-piece lower control arm crossmembers and massive ductile cast iron steering knuckles. Differential relocation brackets place the front differential for perfect CV angles and still allow for the factory front driveshaft to perform as is should. The 6" of lift is provided by bolt-on strut spacers that do not require disassembly of the factory struts to install. New eccentric cam bolts make adjusting the alignment easy, sway bar drops adjust the sway bar to its optimum position and a heavy 1/4" thick differential skid plate protects the underside when off driving off road.

In the rear, full 5" cast iron lift blocks with integrated bump stop wings provide enough lift to level the truck nicely. Rear Hydro or optional Nitro shocks finish out the installation and provide enough clearance for a maximum sized tire of 37x12.50.

Important Notes!

  • *Kit images show upgraded Nitro (black) shocks*
  • Requires frame bracket modification
  • 18" wheels with 5-5.5" of backspacing should be test fit prior to mounting tires to ensure proper tie rod end clearance
  • 18" or larger diameter wheels required. Stock 17"/18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60R20 tire
  • 37x12.50 tires may require some trimming
  • Vehicles equipped with a 2 piece rear driveshaft and carrier bearing may require carrier bearing drop kit # D5405
  • Kit includes a 5" rear block kit (#F2639) that typically nets a slight tail high stance. A 4" rear block kit (#F2419) is available in the options if a more level stance is preferred.
  • Models equipped with Auto 4wd may require front driveshaft replacement

This product fits the following applications:

  • 17-18 Ford F150 4WD
Click to view by year
  • 2017 Ford F150 4WD
  • 2018 Ford F150 4WD

Quick Specs

  • Front Lift Height: 6″
  • Front Lift Method: Strut Spacer
  • Rear Lift Height: 5″
  • Rear Lift Method: Blocks
  • Install Time Hrs: 8-10
  • Difficulty Level 1-5: 4
  • Wheel Size: 18 x 9
  • Back Spacing: 5 - 5.5″
  • Max Tire Size: 37x12.50
  • Wheel Size: 20 x 9
  • Back Spacing: 5 - 5.5″
  • Max Tire Size: 37x12.50

Click/tap photo or caption to open high resolution image [3000x2000, 1500x1000 or 660x440] in a new window.

When used for commercial purposes, Zone Offroad Products images may only be used to promote Zone Offroad and its products. Redistribution or duplication of these images without the express written consent of Zone Offroad is strictly prohibited.

6" Suspension System

6" Suspension System

6" Suspension System

6" Suspension System

6" Suspension System

6" Suspension System

35x12.50x20 Dick Cepek FCII Tires w/ 20x9 Eagle Alloy Wheels (5" BS)

35x12.50x20 Dick Cepek FCII Tires w/ 20x9 Eagle Alloy Wheels (5" BS)

Zone 6" System | 20x10 Fuel Mavericks | 35x12.50 Nitto Trail Grapplers

Zone 6" System | 20x10 Fuel Mavericks | 35x12.50 Nitto Trail Grapplers

Zone 6" System | 20x10 Fuel Mavericks | 35x12.50 Nitto Trail Grapplers

Zone 6" System | 20x10 Fuel Mavericks | 35x12.50 Nitto Trail Grapplers

Zone 6" System | 20x10 Fuel Mavericks | 35x12.50 Nitto Trail Grapplers

Zone 6" System | 20x10 Fuel Mavericks | 35x12.50 Nitto Trail Grapplers

Build Your Kit

After you've selected everything you need for your next project, you can add it to your cart or place it in your garage (You must be logged in to your Zone account to use garage).

Click/tap thenext to selections and accessories for details if available.

Required Vehicle/Kit Selections

Tap to toggle detailsVehicle Specific Requirement


Models equipped with a 2-piece rear driveshaft require the carrier bearing drop kit

Optional Upgrades & Accessories

Shocks


Shock Boots




Total base price + selected options $1,363.59

Add to Cart

Bill Me Later Financing