tap to open/closeSearch by Vehicle

2007-2018 Wrangler JK

3" Suspension System

Zone Offroad J12N/J13N
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System
3" Suspension System

Zone Offroad

p/n J12N/J13N

Base Price

$467.27

Build/Buy This Kit

Availability: In-Stock
This product usually ships within 24 hours and may ship today if ordered before 1pm est.

Quick Specs

View Zone Offroad J12N/J13N Instructions

View Product Warranty

FMVSS No.126 compliant

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well.

Zone Offroad Products is leading the industry by independently testing all suspension kits to verify the kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Featured Technology & Benefits

  • Coil springs designed to give a full 3" of lift while maintaining a factory style ride. Our coils are 2door/4door specific, so be sure to select the proper application.
  • Rear extended sway bar links are included. These links come with urethane bushings to increase performance and reduce body roll. The factory rear links are then used in the front.
  • A rear track bar relocation system is included to perfectly center the axle under your JK
  • 2" bump stop extensions are included to protect your vehicle while still increasing wheel travel
  • Brake line relocation brackets are supplied to allow for the dramatic increase in wheel travel
  • New Zone front and rear shocks are included that are valved specifically for your JK
  • Right Hand Drive compatibleThis kit has been approved for use on right hand drive vehicles but may require installation variations. Refer to this kit's online instructions for the most up to date installation instructions and pay close attention to RHD notes.

Prepare yourself for the perfect combination of off road performance and on road handling. This 3" JK system offers dramatic improvement in both ground clearance as well as wheel travel. With 3" of lift, you can clear those 35's with room to twist as well as use your Jeep for a daily driver. Zone coil springs are designed so they can be totally smashed flat and still return to their original height, so you don't have to worry about your coils sagging!

Important Notes!

  • This complete suspension lift system is designed for 2door and 4 door models
  • WIll work on Rubicon models.
  • The coil springs are 2 door and 4 door specific. Be sure to choose the correct application when ordering.
  • Factory wheels cannot be re-installed due to rear sway bar link interference.
  • 2012-18 models using the stock front driveshaft require exhaust extension kit J5305 listed in the accessories.
  • Optional front alignment cam locks recommended if using stock (or stock length) front lower control arms. Alignment cam locks add 2 degrees of caster when used on stock length control arms.
  • The J12N & J13N kits include Nitro Series Shocks (pn# 7700 & pn#7951). The kit includes either pn# 1310 or #1311 and the Nitro Series Shocks.

This product fits the following applications:

  • 07-18 Jeep Wrangler JK 4WD Gas
  • 07-18 Jeep Wrangler JK RHD 4WD Gas
Click to view by year
  • 2007 Jeep Wrangler JK 4WD Gas
  • 2008 Jeep Wrangler JK 4WD Gas
  • 2009 Jeep Wrangler JK 4WD Gas
  • 2010 Jeep Wrangler JK 4WD Gas
  • 2011 Jeep Wrangler JK 4WD Gas
  • 2012 Jeep Wrangler JK 4WD Gas
  • 2013 Jeep Wrangler JK 4WD Gas
  • 2014 Jeep Wrangler JK 4WD Gas
  • 2015 Jeep Wrangler JK 4WD Gas
  • 2016 Jeep Wrangler JK 4WD Gas
  • 2017 Jeep Wrangler JK 4WD Gas
  • 2018 Jeep Wrangler JK 4WD Gas
  • 2007 Jeep Wrangler JK RHD 4WD Gas
  • 2008 Jeep Wrangler JK RHD 4WD Gas
  • 2009 Jeep Wrangler JK RHD 4WD Gas
  • 2010 Jeep Wrangler JK RHD 4WD Gas
  • 2011 Jeep Wrangler JK RHD 4WD Gas
  • 2012 Jeep Wrangler JK RHD 4WD Gas
  • 2013 Jeep Wrangler JK RHD 4WD Gas
  • 2014 Jeep Wrangler JK RHD 4WD Gas
  • 2015 Jeep Wrangler JK RHD 4WD Gas
  • 2016 Jeep Wrangler JK RHD 4WD Gas
  • 2017 Jeep Wrangler JK RHD 4WD Gas
  • 2018 Jeep Wrangler JK RHD 4WD Gas

Quick Specs

  • Front Lift Height: 3″
  • Front Lift Method: Coil Springs
  • Rear Lift Height: 3″
  • Rear Lift Method: Coil Springs
  • Install Time Hrs: 4-5
  • Difficulty Level 1-5: 2
  • Wheel Size: 16 x 8
  • Back Spacing: 4.5
  • Max Tire Size: 35″ x 12.50″

Click/tap photo or caption to open high resolution image [3000x2000, 1500x1000 or 660x440] in a new window.

When used for commercial purposes, Zone Offroad Products images may only be used to promote Zone Offroad and its products. Redistribution or duplication of these images without the express written consent of Zone Offroad is strictly prohibited.

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

3" Suspension System

Build Your Kit

After you've selected everything you need for your next project, you can add it to your cart or place it in your garage (You must be logged in to your Zone account to use garage).

Click/tap thenext to selections and accessories for details if available.

Required Vehicle/Kit Selections

Tap to toggle detailsVehicle Type/Specs


The J12N & J13N kits include Nitro Series Shocks (pn# 7700 & pn#7951). The kit includes either pn# 1310 or #1311 and the Nitro Series Shocks.

Tap to toggle detailsVehicle Specific Requirement


Vehicle Specific Requirement
2012-18 models using the stock front driveshaft require exhaust extension kit J5305 listed in the accessories.

Tap to toggle detailsDriveline Adjustment


Driveline Adjustment
Recommended if using stock (or stock length) front lower control arms. These alignment cam locks will add 2 degrees of caster to the alignment.

Optional Upgrades & Accessories

Tap to toggle detailsShocks


Shocks
The Performance Series 2.0 iQS Reservoir Shock Kit includes 4 shocks, iQS switch, control module, wiring harness, and mounting hardware. The external reservoir is attached using a billet aluminum clamp and allows for increase oil and nitrogen capacity while delivering striking race look. The race developed high flow damping piston matched with instantly adjustable application specific valving provides the Performance Series 2.0 iQS shock ride quality capable of handling everything from the roughest road conditions to the smooth open highway. Take your JK to the new level in performance, comfort and ease with the FOX Performance Series 2.0 iQS Shocks.

Tap to toggle detailsSway Bar Links



Sway Bar Links

This system uses the factory rear sway bar links in the front. Zone offers replacement front links or sway bar disconnects as optional upgrades. Image shows Front Sway Bar Disconnects (pn# J5313)

Tap to toggle detailsSteering Upgrades

Steering Upgrades

Tap to toggle detailsSuspension Parts




Suspension Parts
Add JKS Manufacturing J-FLEX Adjustable Control Arms for the ultimate control arm upgrade on your Zone equipped JK Compatible with 0 to 6.0 in. suspension lifts using OE attachment points.

Control arm design varies depending on specific arm location

Tap to toggle detailsSuspension Parts

Suspension Parts

Tap to toggle detailsAccessories and Upgrades Selection

Accessories and Upgrades Selection

The J-Cal programmer is an easy to use, digital screen, handheld plug-in programmer that is capable of correcting your speedometer for tire sizes up to 42", and for gear/axle swaps up to 5.38s, with many other features built-in to improve the on-road and offroad performance of your JK Wrangler.

-Corrects speedometer for tire sizes up to 42"

-Speedometer recalibration for gear /axle swaps up to 5.38s

-Locking axle options with transfer case in 4-Hi & 4-Low (07-15 Rubicon only)

-Engine idle adjustability for winching

-ESP stability optimization (11-15 automatic transmission models only)

-Daytime running light options (07-15 models only)

-Horn chirp and exterior lighting flash options when locking doors with keyless entry

-One touch lane change

-TPMS Options (Download required)

-Radio delay options (11-15 models only)

-Headlamp delay options (11-15 models only)

-Reads and clears diagnostic trouble codes

-Internet updatable

-Upgradable to allow performance tuning (07-14 models only)

Tap to toggle detailsAccessories and Upgrades Selection


Accessories and Upgrades Selection
JKS Flex Connect *Disconnecting* Link Kit and Flex Connect Performance Spring Kit for Jeep Wrangler JK w/ 2" - 5" of lift. The Flex Connect is unlike any other sway bar link on the market today.
Developed jointly with PAC Racing Springs, this patent pending design creates a dual-rate sway bar system when used with the factory or aftermarket sway bar. PAC Racing Springs designed the Flex Connect springs to handle hundreds of thousands of cycles and maintain maximum performance. These springs are housed in a precision machined aluminum body and utilize a steel alloy link rod.
The attention to design details stretches to the ends where the industry famous JKS spherical sway bar link bushings are installed in greaseable aluminum ends. The aluminum link is anodized for long term good looks and corrosion resistance.
The Flex Connect is a huge leap forward from a traditional sway bar link. With the specially turned PAC springs, the link is able to extend and compress, working with the factory sway bar to control body roll. The Flex Connect improves the way the stock bar absorbs imperfections in the road (or offroad surface) by soaking up "head bobble" inducing bumps. The Flex Connect also improves the articulation of the JK suspension over the stock setup. The Flex Connect springs compress and extend under load, giving the same effect as if the sway bar was twisting further and allowing the suspension to articulate more. Featuring our popular quick disconnect style pins, this Flex Connect link kit can be disconnected like a normal sway bar disconnect for the extra tough trails.
For those looking to get the ultimate performance out of the Flex Connect link, the optional Performance Spring Kit allows for roll stiffness to be adjusted using one of the 3 unique replacement spring sets. These springs are tuned to work in different terrains or vehicle setups. The Performance Spring kit includes tools and instructions to swap out the pre-installed OE springs with any of the 3 optional spring sets. Choices can be made based on terrain or even how the Jeep is equipped for a particular trip. As the spring set rates get softer they have more travel, increasing the suspensions ability to articulate. Below, each spring spec and function is detailed. This is a guide to get started adjusting the roll stiffness of the Flex Connect system.

Flex Connect Kit Base Spring
OE Spring (Pre-installed in the Flex Connect)
- Effective spring rate is 35% softer than factory, 1.1" total link travel
- Closest spring to a stock fixed length sway bar link. Maintains road manners while still giving the benefit of absorbing the "head-bobble" type bumps
- Changes your stock sway bar system into a dual rate system.


Optional Performance Spring Kit Includes (Available Seperately Below: PN 2100):
Red Spring (Road)
- Effective spring rate is 45% softer than factory, 1.3" total link travel
- High Rate/Low Travel
- For those looking to maintain on road manners but gain a little more Flex Connect travel and forgiveness over the preinstalled OE spring. Also a great choice to higher speed offroad situations
Yellow Spring (Trail)
- Effective spring rate is 60% softer than factory, 1.6" total link travel
- Mid Rate/Mid Travel
- For those looking to venture off the trail for mild offroading at moderate speeds
Blue Spring (Crawl)
- Effective spring rate is 75% softer than factory, 2.3" total link travel
- Low Rate/High Travel
- For playing in the rocks and off-camber situation. Gives more suspension articulation then a stand link/sway bar setup while maintaining the stability of the sway bar.

Full Product Details and Video

Tap to toggle detailsAccessories and Upgrades Selection

Accessories and Upgrades Selection
If you want a larger fullsize spare tire on your jeep, but it won't fit on the stock bracket, here is your solution. This bracket will allow up to a 37" tire to be mounted on the stock spare tire carrier by moving the tire mounting point up 1-1/2" and out 1-3/16". It is designed for the JK 5 on 5" bolt pattern.

Tap to toggle detailsShock Boots




Shock Boots
Image shows Black Shock Boot

Total base price + selected options $467.27

Add to Cart

Bill Me Later Financing