Zone New Product Announcement #135: Chevy 1500 Fender Trim Plates

Zone Offroad New Product Announcement
Zone-C5652

Anyone that has owned or worked on a later model GM truck can attest to the tire clearance limitations from the squared off fenders. While installing a lift is a common solution, even then clearance can be limited and running wider wheels and more aggressive offsets may still cause clearance issues when turning the wheel tightly or cycling the suspension during offroad use. Zone Offroad now offers a solution to help open up additional tire clearance at the lower rear portion of the front fenders with new fender trim plates. These brackets require trimming the factory inner fender and pinch weld behind the liner to install these new inner fender trim plates for 5/8" of additional tire clearance. Commonly referred to as the Norcal fender mod, these new brackets allow for a cleaner factory looking appearance once completed by reusing the factory inner fender hardware and plastic corner guard rather than using zip ties or self tapping screws commonly used to do this mod. Currently these fender trim plates are available for the 2014-2018 Chevy Silverado 1500 trucks, additional applications will be coming soon.

Product Description

'14+ Chevy 1500 Front Fender Trim Plates

Vehicle Fitment

2014-2018 Chevy Silverado 1500

Kit Info

#C5652 - $19.95

Install Time/Difficulty

1-2 Hours / 1 of 5 Difficulty

*** Check website or verify with Zone Offroad prior to ordering to confirm product is up to date with current manufacturer listing ***

© Zone Offroad Products, 491 W. Garfield Ave. Coldwater, MI 49036
888–998–Zone (9663) | zoneoffroad.com | sales-zone@ridefox.com

8 comments on “Zone New Product Announcement #135: Chevy 1500 Fender Trim Plates”

    • Carter @ Zone Offroad Reply

      We have additional fender trim kits in the works, as new kits hit the shelves ready to ship we’ll be sending out announcements and adding them to our website

  1. Jason Norris Reply

    I currently installed the 6.5 inch lift with 35″ tires on a 2015 Chevrolet 1500 Silverado. I was told no rubbing would occur but it has. For some reason its only when i reverse and turn sharp. Will this plate work for my truck to prevent the rubbing?

    • Carter @ Zone Offroad Reply

      Hi Jason, while the 6.5″ lift kit allows for clearance of up to 35×12.50 tires, ultimately that is dependent on following the wheel recommendations we list on our website, http://zoneoffroad.com/zone-offroad-products-5-6.5in-suspension-lift-kit-chevy-gmc-pickup/c25-c26. Wider wheels and wheels with smaller backspacing measurements may rub in some situations and require trimming. While I can’t guarantee this fender trim plate will eliminate all rubbing in all situations (especially without knowing your wheel specs), it will further improve tire clearance at the backside of the front wheel well opening

  2. Eric Hempstead Reply

    You planning on a kit for the 2500 and 3500 trucks, new body style. Need to do this to my ’18 3500. Thanks

    • Carter @ Zone Offroad Reply

      Hi Eric, we have a several of these trim plate kits in the works, unfortunately I can’t discuss which applications or expected release dates (company policy). As kits hit the shelves ready to ship we’ll be adding them to our website and begin promoting.

  3. chad catellier Reply

    With the Chevrolet trim kit bracket #c5652 does this work on 2500 or just 1500. I can’t see it being different

    • Carter @ Zone Offroad Reply

      Hi Chad, these are designed for use on the 1500 models only and haven’t tested on the 2500s at this point.

Leave A Reply

Your email address will not be published. Required fields are marked *